Download Print this page

Seastar Solutions Teleflex HC5331-3 Installation Instructions

Cylinder

Advertisement

Quick Links

Installation:
Figure
NOTICE
SHOWA
(LATE MODEL)
Figure C
TELEFLEX
© 2004 Teleflex Canada Limited Partnership 3831 No. 6 Road, Richmond, B.C, Canada V6V 1P6
INST LL TION INSTRUCTIONS
M A R I N E
opy Part# 810038 Rev. , 09/2009
CYLINDER HC5331-3
The Teleflex HC5331-3 steering cylinder is NOT compatible with
some early model power steering rams. lthough the cylinder
will still mount to these rams, loss of articulation and possible
damage to the steering ram may result. Please identify your
power steering cylinder by comparing your clevis bracket to the
4 drawings shown below. The HC5331-3 IS compatible with
units identified by figures
with the clevis bracket in figure D shown below.
ALWAYS INSTALL CYLINDER
HC5331 IN THE OUTER HOLE
COMPATIBLE
COMPATIBLE
to C below, it is NOT compatible
Figure B
HOERBIGER
Figure D
SHOWA
(EARLY MODEL
PRE 1992)
Fax: 604-270-7172
Page 1 of 2
COMPATIBLE
NOT
COMPATIBLE
Web: www.seastarsteering.com

Advertisement

loading

Summary of Contents for Seastar Solutions Teleflex HC5331-3

  • Page 1 Page 1 of 2 CYLINDER HC5331-3 Installation: The Teleflex HC5331-3 steering cylinder is NOT compatible with some early model power steering rams. lthough the cylinder will still mount to these rams, loss of articulation and possible damage to the steering ram may result. Please identify your power steering cylinder by comparing your clevis bracket to the 4 drawings shown below.
  • Page 2 INST LL TION INSTRUCTIONS M A R I N E opy Part# 810038 Rev. , 09/2009 Page 2 of 2 CYLINDER MOUNTING AND PARTS LIST NOTICE CAUTION Rotate able Tube into threads of Item 3 until tight. CUT CLEVIS PIN, ITEM 10 TO A LENGTH OF 2"...