DeFelsko PosiTector Instruction Manual page 11

NOTE: PosiSoft Desktop is required when using USB
connections to synchronize measurements with PosiSoft.net.
Bluetooth Smart
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart is
enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
selected
batches that have yet to be synchronized with any smart device
are synchronized automatically.
If Bluetooth Smart is disabled, data from batches
NOTE:
selected in the Sync Batches menu are held in a queue until
communication with the PosiTector App is re-established.
Send Batches
Transfers selected
when switching between devices).
The send batches option is visible in the menu when the Gage is
connected to a smart device running the PosiTector App.
Updates
Determine if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
update (pg. 5). All stored measurements will be erased from
memory.
(Advanced models only, serial numbers 784000 and greater)
batches to the PosiTector App. Only readings and
batches to the PosiTector App (useful
The Gage will perform a Hard Reset after an
9