SMC Networks EX600-WPN Operation Manual page 5

: About the communication timing
The NFC communication is not accessed all the time. Therefore, it is necessary to update the contents displayed on
the screen by clicking the "Refresh button" when reading the parameters. The parameters changed are valid after
re-supplying the power supply or by pressing the reset button in the I/O Configurator screen. As the parameter
setting requires time for settlement, do not turn off the power supply for 2 seconds.
: Establishing communication after changing units
As the settings between the wireless master unit and the wireless slave unit are different, it is necessary to update the
displayed parameter by clicking the "Refresh button" on the screen of the I/O Configurator for NFC after changing the
unit in which the parameter is set.
: Operation already checked. NFC reader/writer
SONY Corporation
Advanced Card Systems Ltd.
: I/O Configurator (Web version)
This operation manual explains the outline of the setting using the I/O Configurator (NFC). I/O Configurator (Web) is
used to set the module I/O occupied points and parameters for the "wireless master" and parameters for the "I/O
devices". Refer to the operation manual for the I/O Configurator (Web version).
: The product is available in Japanese, English, and Chinese by setting the language in the Windows OS.
RC-S380/S
ACR1251U (FW212 or later), ACR1252U (FW104.6 or later)
-4-
No.EX※※-OMV0017-B