Precautions - Sony Vaio VGP-BRMP10 Operating Instructions Manual

Bluetooth presentation controller
Table of Contents

Advertisement

Precautions

Safety
If any solid object or liquid falls onto the
controller, disconnect it and have it
checked by qualified personnel before
continuing its use.
Location
Do not place the controller in a location
where it is:
• On an unstable surface
• In very humid areas or where there is no
ventilation
• Subject to excessive dust
• Subject to direct sunlight or extreme
heat
• Extremely cold
Operation
If the controller is brought directly from a
cold to a warm location or is placed in a
very damp room, moisture may condense
on the inside of the controller. If this
occurs, the controller may not work
properly.
In this case, wait about 30 minutes for the
moisture to evaporate. If the controller
does not work properly after one hour,
consult your nearest Sony dealer.
Bluetooth communications
• The 2.4 GHz band used by Bluetooth
and wireless LAN devices is also used
by various other devices. Bluetooth
devices incorporate technology that
minimizes interference from other
devices using the same wavelength.
However, communication speed and
achievable distances may be reduced.
Interference from other devices can also
stop communications altogether.
GB
18
PrecautionsはIRX-9247から流用しています。
• The data transfer rate will vary
depending on distance and obstacles
between devices, device configuration,
radio interference, operating system,
software application, and so on. In some
cases, communication may be
interrupted.
• Communication range will vary
according to whether walls or other
obstacles are located between devices,
the material used in walls, the presence
of radio frequency interference and
other environmental conditions, and the
type of software being used.
• If wireless LAN and Bluetooth
functionality are used at the same time
on the same personal computer,
communication speed may be reduced
due to electromagnetic interference, and
other unwanted effects may occur.
Cleaning the outside of the controller
Clean the controller with a soft, dry cloth
or a soft cloth lightly moistened with a
mild detergent solution. Do not use any
type of abrasive pad, scouring powder, or
solvent such as alcohol or benzene.
VGP-BRMP10_3-196-908-01(1)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents