Using The Controller; Giving A Presentation - Sony Vaio VGP-BRMP10 Operating Instructions Manual

Using the Controller

Giving a presentation

This section describes the steps for giving a presentation using PowerPoint
software.
See "Location and Function of Controls" (page XX) for instructions on
using the buttons and touchpad.
Also see "Tips for giving a smooth presentation" (page XX).
1
Open the file for your presentation in PowerPoint software.
2
Start a slideshow.
Press the SLIDE SHOW button.
z Hint
• If nothing happens, try pressing the button again.
• By default, during a presentation the pointer is hidden if it does not move for more
than 3 seconds. See "Tips for giving a smooth presentation" (page XX) to make
the pointer visible at all times.
To display the next slide
Press the Next Slide button.
To display the previous slide
Press the Previous Slide button.
3
End a slideshow.
Press the SLIDE SHOW button.
z Hint
If nothing happens, try pressing the button again.
SLIDE SHOW button
Continued on next page
VGP-BRMP10_3-196-908-01(1)
GB
13