Sony Vaio VGP-BRMP10 Operating Instructions Manual page 11

CONNECT button
7
Select "Express Mode", and click "Next".
Search for Bluetooth devices begins.
8
In the device list, select "VGP-BRMP10", and click "Next".
If your personal computer is pre-installed with Windows Vista:
The "Add New Connection Wizard" screen disappears. Try moving the
controller. If the pointer displayed on your screen moves in the same
direction, the connection is complete.
z Hint
When the connection is complete, the Bluetooth status lamp turns blue and flashes
slowly.
If your personal computer is pre-installed with Windows XP:
Go to step 9.
Note
If the "Found New Hardware Wizard" appears, follow the wizard's instructions to
install the software.
9
Click "OK" at the prompt to connect the HID device.
10
Verify the contents of the window displayed, and click "Next".
11
Click "Finish".
Try moving the touchpad of the controller. If the pointer displayed on your
screen moves in the same direction, the connection is complete.
z Hint
When the connection is complete, the Bluetooth status lamp turns blue and flashes
slowly.
Bluetooth status lamp
Continued on next page
VGP-BRMP10_3-196-908-01(1)
GB
11