Download  Print this page

Sony RM-VZ220 Operating Instructions Manual

Remote commander
Hide thumbs

Advertisement

ns.
uired code, you can search for the next or previous
button.
number buttons.
es three times.
es three times and turns off.
art searching.
off, release the button.
er works correctly (see "Remote Button
uired code, you can search for the next or previous
button.
te the device, repeat steps to search for another
st functions of your device.
Remote Commander
es three times and turns off.
nufacturer's code you have set
er works correctly (see "Remote Button
RM-VZ220
more than 3 seconds.
te the device, repeat steps to search for another
st functions of your device.
s up.
d down, press the desired Device Select button,
ns.
©2010 Sony Corporation
nufacturer's code you have set
number buttons.
es three times.
more than 3 seconds.
s up.
d down, press the desired Device Select button,
r starts flashing, count the number of flashes.
English
ns.
which digit (first, second, etc.), followed by long
number buttons.
digit number (i.e., 2 long flashes represent the
es three times.
ted by rapid flashing.
For the Customers in the U.S.A.
ode number this way. To recheck, press
r starts flashing, count the number of flashes.
WARNING
which digit (first, second, etc.), followed by long
omatic power-on control (Sony
This equipment has been tested and found to comply with the limits for a Class B digital
digit number (i.e., 2 long flashes represent the
ted by rapid flashing.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
ode number this way. To recheck, press
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
are preset to automatically turn on a device when
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
omatic power-on control (Sony
particular installation. If this equipment does cause harmful interference to radio or
more than 3 seconds.
television reception, which can be determined by turning the equipment off and on, the
s up.
user is encouraged to try to correct the interference by one or more of the following
d down, press
, then release both buttons.
are preset to automatically turn on a device when
measures:
number buttons.
Reorient or relocate the receiving antenna.
es three times.
Increase the separation between the equipment and receiver.
more than 3 seconds.
Connect the equipment into an outlet on a circuit different from that to which the
e Select button.
s up.
receiver is connected.
es three times and turns off.
d down, press
, then release both buttons.
Consult the dealer or an experienced radio/TV technician for help.
perform the same procedure above.
You are cautioned that any changes or modifications not expressly approved in this
number buttons.
manual could void your authority to operate this equipment.
es three times.
tory settings
e Select button.
gs and reset the RM-VZ220 to its factory settings.
es three times and turns off.
Setting Up the RM-VZ220
more than 3 seconds.
perform the same procedure above.
s up.
d down, press
, then release both buttons.
The RM-VZ220 is preset at the factory to operate Sony brand video devices
tory settings
number buttons.
set to any of the Device Select buttons (see the table below).
gs and reset the RM-VZ220 to its factory settings.
es three times.
To use with non-Sony devices, or Sony devices that are not preset at the
ton except
.
more than 3 seconds.
factory, set the manufacturer's code for each device.
s up.
d down, press
, then release both buttons.
es three times and turns off.
Devices
number buttons.
TV
es three times.
ton except
TV, Cable set top box, Satellite
.
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
es three times and turns off.
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
* The five-digit code is the preset manufacturer's code.
Note
Only a TV can be assigned to the TV Device Select button. You can assign any device to
the other Device Select buttons.
Printed in China
General
SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
Device Select buttons: Press to select the device to operate.
GUIDE: Displays the program guide (EPG).
/ / / /
: Moves the cursor to select a menu item/enters the selected item.
General
RETURN: Returns to the previous display/exits the menu.
VOL +/–: Turns the volume up/down.
SET: Press to set up the RM-VZ220. The indicator lights or flashes while
.
POWER: Turns the selected device on and off.
setting.
Device Select buttons: Press to select the device to operate.
MUTING: Mutes the volume. Press again to turn muting off.
GUIDE: Displays the program guide (EPG).
SLEEP: Enables the Sleep function (when available).
/ / / /
: Moves the cursor to select a menu item/enters the selected item.
The number 5, CH+, and
RETURN: Returns to the previous display/exits the menu.
The GUIDE and RETURN buttons do not work for a VCR.
VOL +/–: Turns the volume up/down.
.
Note on the VOL+/– and MUTING buttons
POWER: Turns the selected device on and off.
When a TV or other video device is selected, the TV's volume is controlled. When a
MUTING: Mutes the volume. Press again to turn muting off.
DVD Home Theater is selected, its volume can be controlled.
SLEEP: Enables the Sleep function (when available).
The number 5, CH+, and
TV
The GUIDE and RETURN buttons do not work for a VCR.
: VIDEO 1 input
Note on the VOL+/– and MUTING buttons
: VIDEO 2 input
When a TV or other video device is selected, the TV's volume is controlled. When a
: HDMI input
DVD Home Theater is selected, its volume can be controlled.
: RGB input
: (PIP INPUT) Changes the
TV
input mode of the "window"
picture.
: VIDEO 1 input
: (PIP) Turns the "window"
: VIDEO 2 input
picture on and off.
: HDMI input
: (PIP MOVE) Moves the
: RGB input
location of the "window" picture.
: (PIP INPUT) Changes the
: (PIP STILL) Freezes the
input mode of the "window"
"window" picture.
picture.
: (PIP SWAP) Switches between
: (PIP) Turns the "window"
"main" and "window" picture.
picture on and off.
A: Red button
: (PIP MOVE) Moves the
B: Green button
location of the "window" picture.
C: Yellow button
: (PIP STILL) Freezes the
D: Blue button
"window" picture.
LIST: (CAPTION) Displays closed
: (PIP SWAP) Switches between
captioning.
"main" and "window" picture.
A: Red button
B: Green button
Button
Factory setting*
C: Yellow button
D: Blue button
TV
Sony TV (00810)
LIST: (CAPTION) Displays closed
Cable set top box (non-
CBL (SAT)
captioning.
Sony) (51376)
VCR
Sony VCR (60032)
Sony DVD player
DVD
(11033)
Provided by www.replacementremotes.com

Operating Instructions

Manual de instrucciones (parte posterior)

Installing the batteries

Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
buttons each have a tactile dot for ease of use.
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1
buttons each have a tactile dot for ease of use.
MENU: Calls up the menu display.
INPUT: Changes the input mode.
1 – 9, 0, ENTER, (dot):

Battery life

Changes the channel. For example,
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
year. If the RM-VZ220 does not operate properly, the batteries might be
PAGE +/–: (PIP CH +/–) Changes
MENU: Calls up the menu display.
drained. Replace both batteries with new ones.
the channel up/down in the
INPUT: Changes the input mode.
"window" picture.
1 – 9, 0, ENTER, (dot):
Notes
FAVORITES: Enables the Favorite
Changes the channel. For example,
Replace the batteries within 2 minutes after removing them, and do not press any
function.
to change to channel 5, press 0 and
button when replacing the batteries. Otherwise, your code settings may be cleared.
INFO: Displays program
5 (or, press 5 and ENTER).
information.
Do not use an old battery with a new one, or mix different types of batteries together.
PAGE +/–: (PIP CH +/–) Changes
OPTIONS: Displays the options
If the electrolyte inside the battery should leak, wipe the contaminated area of the
the channel up/down in the
menu.
"window" picture.
battery compartment with a cloth and replace the old batteries with new ones. To
RECALL: Selects the channel
FAVORITES: Enables the Favorite
prevent electrolyte from leaking, remove the batteries when you plan not to use the
previously selected.
function.
RM-VZ220 for a long period of time.
CH +/–: Switches the channel up/
INFO: Displays program
down.
information.
OPTIONS: Displays the options

Specifications

menu.
RECALL: Selects the channel
previously selected.
CH +/–: Switches the channel up/
Operating distance
down.
Power requirements
Battery life
Dimensions
Mass
Design and specifications are subject to change without notice.

Troubleshooting

If you have problems setting up or using the RM-VZ220:
Carefully perform the setup procedure of "Startup Guide. " If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturer's code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see "Searching for the correct code").
Aim the RM-VZ220 directly at the device.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
The batteries are weak, or not inserted correctly. Replace them with new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Guide.
: Fast forwards.
LIST: Displays the title of recorded
: Records.
program.
: Pauses.
: Stops.
A, B, C buttons
Satellite receiver
D: (Live TV) Displays Master
Guide.
: Proceeds to the previous
LIST: Displays the title of recorded
location.
program.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
Satellite receiver
scene (Flash +).
: Proceeds to the next location.
: Proceeds to the previous
: Fast reverses.
location.
: Plays.
: Briefly replays the scene
: Fast forwards.
(Flash –).
: Records.
: Briefly fast forwards the
: Pauses.
scene (Flash +).
: Stops.
: Proceeds to the next location.
4-170-642-12(1)
Startup Guide
A: Red button
: Fast reverses.
Remote Commander
Operating Instructions
Manual de instrucciones (parte posterior)
RM-VZ220
B: Green button
: Plays.
©2010 Sony Corporation
Printed in China
C: Yellow button
: Fast forwards.
English
D: Blue button
: Records.
Installing the batteries
For the Customers in the U.S.A.
Slide open the battery compartment and insert two size AA (R6) dry
WARNING
batteries (not supplied).
This equipment has been tested and found to comply with the limits for a Class B digital
LIST: Displays the title of recorded
Insert the batteries (negative end first) through the guide clamp within each
: Pauses.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
compartment as shown below.
reasonable protection against harmful interference in a residential installation. This
1
2
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
program/PVR menu.
particular installation. If this equipment does cause harmful interference to radio or
: Stops.
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Battery life
Reorient or relocate the receiving antenna.
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
Increase the separation between the equipment and receiver.
A: Red button
Connect the equipment into an outlet on a circuit different from that to which the
year. If the RM-VZ220 does not operate properly, the batteries might be
receiver is connected.
drained. Replace both batteries with new ones.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
Notes
Replace the batteries within 2 minutes after removing them, and do not press any
manual could void your authority to operate this equipment.
B: Green button
button when replacing the batteries. Otherwise, your code settings may be cleared.
Do not use an old battery with a new one, or mix different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated area of the
Setting Up the RM-VZ220
VCR
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte from leaking, remove the batteries when you plan not to use the
C: Yellow button
RM-VZ220 for a long period of time.
The RM-VZ220 is preset at the factory to operate Sony brand video devices
Notes
set to any of the Device Select buttons (see the table below).
If the setting is incomplete,
To use with non-Sony devices, or Sony devices that are not preset at the
Specifications
the SET indicator flashes once
factory, set the manufacturer's code for each device.
and the indicators turn off.
D: Blue button
Start again from the
Devices
Button
Factory setting*
Operating distance
Approx. 11 m (36 ft) (varies depending on devices of
beginning.
: Rewinds.
TV
TV
Sony TV (00810)
different manufacturers)
If no operations are
Power requirements
Two size AA (R6) dry batteries (not supplied)
performed for 10 seconds
TV, Cable set top box, Satellite
CBL (SAT)
Cable set top box (non-
Battery life
Approx. 1 year when using size AA (LR6) alkaline batteries
while setting, the setting will
receiver, IPTV, DVD player, DVD
Sony) (51376)
LIST: Displays the title of recorded
(varies depending on frequency of button use - up to approx.
be canceled, and must be
recorder, Blu-ray Disc player, DVR
VCR
Sony VCR (60032)
300 times per day.)
restarted.
: Plays.
(digital video recorder), PVR
Dimensions
Approx. 53 × 213 × 27 mm (2
/
1
× 8
1
/
× 1
1
/
in.)
To cancel the process, press
8
2
8
DVD
Sony DVD player
(w/h/d)
SET any time. The SET
(personal video recorder), VCR,
(11033)
DVD Home Theater
Mass
Approx. 100 g (3.5 oz) (not including batteries)
indicator turns off.
program/PVR menu.
Design and specifications are subject to change without notice.
* The five-digit code is the preset manufacturer's code.
Note
: Fast forwards.
Only a TV can be assigned to the TV Device Select button. You can assign any device to
Troubleshooting
the other Device Select buttons.
If you have problems setting up or using the RM-VZ220:
: Records.
Carefully perform the setup procedure of "Startup Guide. " If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturer's code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see "Searching for the correct code").
Aim the RM-VZ220 directly at the device.
: Pauses.
Remove any obstacles in the path between the RM-VZ220 and the device.
Make sure you have pressed the correct Device Select button.
VCR
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
2
RM-VZ220.
: Stops.
The batteries are weak, or not inserted correctly. Replace them with new ones or insert
them correctly.
For the customers in the U.S.A.
INPUT: Changes the input mode.
Customer Support Information
: Rewinds.
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
1 – 9, 0: Number buttons
: Plays.
: Ejects a tape.
: Fast forwards.
: Records.
: Pauses.
DVD player/recorder
: Stops.
INPUT: Changes the input mode.
: Skips to the previous
1 – 9, 0: Number buttons
chapter/track.
: Ejects a tape.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
DVD player/recorder
scene (Flash +).
: Skips to the next chapter/
: Skips to the previous
track.
chapter/track.
: Fast reverses.
: Briefly replays the scene
: Plays.
(Flash –).
: Fast forwards.
: Briefly fast forwards the
: Records (for DVD recorder).
scene (Flash +).
: Pauses.
: Skips to the next chapter/
: Stops.
track.
A: (SET UP) Calls up the system/
: Fast reverses.
setup menu.
: Plays.
B: (SUBTITLE) Switches the
: Fast forwards.
subtitle.
: Records (for DVD recorder).
C: (AUDIO) Changes the sound.
: Pauses.
D: (CLEAR) Clears the setting.
: Stops.
LIST: Displays the Title List.
A: (SET UP) Calls up the system/
Approx. 11 m (36 ft) (varies depending on devices of
MENU: Displays the DVD menu.
setup menu.
different manufacturers)
B: (SUBTITLE) Switches the
Two size AA (R6) dry batteries (not supplied)
subtitle.
Approx. 1 year when using size AA (LR6) alkaline batteries
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
(varies depending on frequency of button use - up to approx.
LIST: Displays the Title List.
300 times per day.)
MENU: Displays the DVD menu.
Approx. 53 × 213 × 27 mm (2
1
(w/h/d)
Approx. 100 g (3.5 oz) (not including batteries)
CH +/–: Switches the cha
INFO: Displays program
down.
information.
OPTIONS: Displays the
menu.
RECALL: Switches betwe
4-170-642-12(1)
current and previous ch
CH +/–: Switches the cha
MENU: Calls up the men
down.
INPUT: (TV/SAT) Switc
output between SAT and
1 – 9, 0, ENTER,
Changes the channel. Fo
to change to channel 5, p
5 (or, press 5 and ENTE
MENU: Calls up the men
PAGE +/–: Page up/dow
INPUT: (TV/SAT) Switc
FAVORITES: Enables th
output between SAT and
function.
1 – 9, 0, ENTER,
INFO: Displays program
Changes the channel. Fo
information.
to change to channel 5, p
OPTIONS: Displays the
5 (or, press 5 and ENTE
Searching for the corre
This guide shows you how to set up and use the RM-VZ220 to operate your devices.
dish menu/Station Index
If your Sony device has already been preset, see "Operate the device."
PAGE +/–: Page up/dow
You can set the manufacturer's cod
1 Power on the device with its pow
Set the manufacturer's code
2 Aim the RM-VZ220 at the devic
RECALL: Tunes to the la
Example: To set up a Philips TV
3 Press and hold SET for more tha
FAVORITES: Enables th
The SET indicator lights up.
1
SET
Find the manufacturer's code in "Manufacturer's Code List. "
While keeping SET held down, p
then release both buttons.
POWER
station.
Manufacturer's Code List /
Waycon
Wards
Brand
Code No.
00054
00156
4 Enter 9 - 2 - 2 using the number
Device
Lista de códigos del fabricante
Westinghouse
White
01712, 00885, 01577
00463, 01661
TV / TV
function.
English
Wyse
Westinghouse
Zenith
00463, 01661
01365
Select
code numbers (Code No.).
The following tables show brand names (Brand) and their corresponding
The SET indicator flashes three t
1 Press and hold SET for more than 3 seconds.
The SET indicator lights up.
DVD player / Reproductor de DVD
Brand
Code No.
Brand
Code No.
then release both buttons.
While keeping SET held down, press the desired Device Select button,
Sony
Accurian
10675
11070, 11431, 11516
11633, 10533, 10864, 11033,
Onkyo
Oppo
12147
10503, 11769, 10627, 11627,
10575, 12545
Brand
Code No.
Brand
Code No.
buttons
2 Enter the manufacturer's code.
The SET indicator flashes three times and turns off.
Akai
Allegro
10695
10869
Panasonic
Philco
10675
10490, 11579, 11641
Español
Apex Digital
Bel Canto Design
Broksonic
11571
10672, 11056
10695
Pioneer
Philips
10142, 10631, 11571, 12442
12434
10646, 10675, 11267, 11354,
10503, 10539, 12056, 12084,
Sony
00810, 00000
Midland
00051
5 Press and hold
to start searc
de código correspondiente (Code No.).
La siguiente tabla muestra los nombres de las marcas (Brand) y el número
Citizen
CyberHome
CineVision
10869
10695
11024
Polk Audio
Presidian
10539
10675
1 Presione y mantenga presionado el botón SET durante más de 3 segundos.
Se encenderá la luz indicadora SET.
Disney
Denon
Daewoo
10675, 11270
10490, 11634, 12258
10869
Proscan
RCA
12587, 12592, 12594
10522, 11769, 10822, 12213,
10522
Acer
01339
Mitsubishi
01250, 00150, 00836
When the device turns off, releas
dispositivo deseado y luego suelte ambos botones.
Mientras tiene presionado el botón SET, presione el botón de selección de
Funai
Emerson
Enterprise
10675
10591
10591, 10675
Rio
Rotel
Samsung
10490, 10573, 10199, 11044,
10623
10869
2 Ingrese el código del fabricante.
El indicador SET parpadeará tres veces y se apagará.
GFM
GE
10522
10675
Sanyo
Sansui
10695
10695
11075, 12329, 12489
Action
00650
CH +/–: Switches the cha
NAD
00156
GoldStar
Go Video
11075
10744, 10741, 10869, 11044,
10741
Shinsonic
Sonic Blue
Sharp
10533
10869
10630, 10675, 12250
BPL
01543
Panasonic
01480, 00051, 00650
If you overshoot the required co
TV / TV
Brand
Code No.
Brand
Code No.
Hitachi
Harman/Kardon
Hiteker
10672
11229
10573, 10664
Sylvania
Symphonic
TCL
10675
10675
12587
INFO: Displays program
Acer
Sony
00810, 00000
01339
Midland
Mitsubishi
00051
01250, 00150, 00836
Insignia
Integra
JVC
10675, 12428, 12596
11769, 10627, 12147
10623, 10867, 11164
Tivo
Technics
10490
11503
Broksonic
00463
PARK
02104
Action
Admiral
Akai
00463
00812, 01675, 00702, 02232
00650
NEC
NetTV
NAD
00156
01755
01797
Magnavox
LG
Kenwood
10591, 10741, 10869
10503, 10539, 10646, 10675,
10490
Urban Concepts
Toshiba
10503, 11769, 10695, 11154,
11503, 12006, 12277
10503
code using the
or
butto
Apex Digital
Akira
AOC
00748
01365, 01589
01733
Onida
Olevia
Norcent
00748, 01365, 01589
01610, 01144, 01331
01253, 02396
Marantz
Memorex
10695, 11270, 12213
10539, 12414, 12432
11354
Viore
Vtrek
Vizio
12553
12563
12587
Carver
00054
Penney
00156, 00051
BPL
Aventura
Bell & Howell
01543
00154
00171
Optimus
Panasonic
Orion
00154, 00650
00463, 01463
01480, 00051, 00650
Mitsubishi
Microsoft
11521
10522, 12083
Xbox
Yamaha
10522, 12083
12298
10490, 10539, 10497, 10817,
Carver
Broksonic
00054
00463
Penney
PARK
02104
00156, 00051
Olevia
NAD
12331
10741, 12572
Zenith
10503, 10591, 10741, 10869
Celebrity
00000
Petters
01523
Celebrity
Commercial
Coby
01447
02306, 02345, 02348
00000
Philips
Philco
Petters
01523
00054
01454, 00054, 00690, 01744,
DVD recorder / Grabadora de DVD
Coby
02306, 02345, 02348
Philco
00054
6 Press
.
Curtis
Crosley
Solutions
00054
02352
Polaroid
Pioneer
01523, 01276, 01314, 01687
02372
01457, 01260
Brand
Sony
Code No.
11033, 11070, 11431
Philips
Brand
Code No.
10646
Daewoo
Digital Lifestyles
Curtis Mathes
01765
01661
00054, 00154, 00702, 01661
Proscan
Prism
Portland
00051
01447, 02147, 02256
01661
Accurian
Apex Digital
10675
11056
Pioneer
RCA
10631
10522
Commercial
01447
Philips
01454, 00054, 00690, 01744,
The SET indicator flashes three t
Dynex
Durabrand
Electroband
00000
00463, 00171
01463, 01810, 02049
Quasar
RadioShack
Proview
00154
01687
00051, 00650
Funai
Go Video
JVC
10741
11164
10675
Sylvania
Sharp
Samsung
10675
10675
10490
Electrograph
Elektra
Electrohome
01661
00463
01755
RCA
Realistic
02403, 02429, 02434
01447, 01781, 02187, 02247,
00154
Panasonic
Magnavox
LG
10646, 10675
10741
10490, 11579
Toshiba
Zenith
12277
10741
Solutions
down.
02372
Emerson
Element
01864, 00154, 00463, 00171,
01687
Sampo
Samsung
00812, 00702
01755
Crosley
00054
Pioneer
01457, 01260
Envision
Emprex
01365, 01589
01661, 01394
01765
Sansui
Sceptre
Sanyo
00154, 01142
01360, 01599
00463
Reproductor de Blu-ray Disc/HD-DVD
Blu-ray Disc/HD-DVD player/
information.
7 Check if the code number works
Funai
ESA
Fisher
00812, 00171
00154
00171
Sharp
Sears
Scott
01711
00818
00054, 00154, 00156, 00171
Sony
Brand
Code No.
11516
Brand
Panasonic
Code No.
11641
Curtis
02352
Polaroid
01523, 01276, 01314, 01687
GE
Gateway
GFM
01755, 01756
01447, 00051, 02359
00171
Squareview
Superscan
Spectroniq
01687
00864
00171
Insignia
Denon
10675, 12428, 12596
12258
Pioneer
Philips
10142, 12442
12084, 12434
Hisense
Harman/Kardon
Haier
01748, 01749, 02309, 02449
00054
00748, 01314, 02098
Supreme
SVA
Sylvania
00748
01864, 00054, 00171, 01314,
00000
LG
Magnavox
Integra
11769, 12147
10741
10675
Sharp
Samsung
RCA
11769
10199
12250
Curtis Mathes
00054, 00154, 00702, 01661
Portland
01661
Descriptions").
iLo
Hitachi
01643, 02215, 02433
01684
Symphonic
Syntax
00171
01394
01610, 01144, 01331
Marantz
Microsoft
NAD
12572
12414, 12432
12083
Viore
Toshiba
Sylvania
10675
11769
12553
JBL
Insignia
Infinity
00054
00054
01564, 00171, 02049
TCL
Tatung
01756
02403, 02429
Oppo
Onkyo
Olevia
12331
11769, 12147
12545
Vizio
Xbox
Yamaha
12083
12298
12563
Daewoo
01661
Prism
00051
If you still cannot operate the de
KDS
JCB
JVC
00731, 01253, 01601, 01774
00000
01687
Technics
Techwood
Teknika
00054, 00150
00051
00051
Digital Lifestyles
01765
Proscan
01447, 02147, 02256
LG
LXI
Kolin
01331
00054, 00154, 00156
01423, 02358
Telefunken
Toshiba
TVS
01524, 00154, 00156, 00650
00702
00463
MAG
Magnavox
01365, 02372
01687
01454, 01866, 00054, 01254,
Venturer
Videocon
Vidikron
00054
01540, 01541, 02436
01865
Durabrand
00463, 00171
Proview
01687
code that works for most functio
Matsushita
Marantz
00054
00650
Viore
Viewsonic
01684, 02104, 02352
01755, 00864, 00885, 01627,
01742
Memorex
MGA
Maxent
00150
01755
00154, 00463, 00150
Vizio
VU
02098
01758, 00864, 00885, 01756
OPTIONS: Displays the
If your device is not listed, try the Search function (see "Searching for the correct code").
Checking the manufact
2
Press and hold SET for more than 3 seconds.
1 Press and hold SET for more tha
Number
The SET indicator lights up.
dish menu/Station Index
buttons
The SET indicator lights up.
While keeping SET held down, p
then release both buttons.
While keeping SET held down, press
2 Enter 9 - 3 - 3 using the number
the desired Device Select button,
The SET indicator
The SET indicator flashes three t
RECALL: Tunes to the la
then release both buttons.
lights up.
3 Press
.
3
4 When the SET indicator starts fl
Enter the manufacturer's code (01454).
Short flash(es) indicate which di
station.
flash(es) to indicate the digit num
The SET indicator flashes three times and
number 2). "0" is indicated by ra
turns off.
Determine the 5-digit code num
5 Press SET to finish.
CH +/–: Switches the cha
Clearing the automatic
INFO: (DISPLAY) Displ
devices only)
down.
The Device Select buttons are prese
Operate the device
pressed.
playback information.
To cancel the function:
1
1 Press and hold SET for more tha
Aim the RM-VZ220 directly at the device.
The SET indicator lights up.
2
Press the Device Select button for the
While keeping SET held down, p
OPTIONS: (ANT/SW) S
device you want to operate.
2 Enter 9 - 7 - 7 using the number
The SET indicator flashes three t
3 Press the desired Device Select b
the antenna output.
The SET indicator flashes three t
3
Press POWER to turn on the device.
To set the function again, perform
Restoring the factory s
RECALL: (DRIVE SELE
You can clear all the settings and re
4
Press buttons on the RM-VZ220 to check that they function.
1 Press and hold SET for more tha
The SET indicator lights up.
See "Remote Button Descriptions" for the functions of buttons for each device.
the deck.
While keeping SET held down, p
2 Enter 9 - 0 - 0 using the number
If the RM-VZ220 does not seem to be working...
The SET indicator flashes three t
Check that you have set the correct manufacturer's code.
To cancel, press any button excep
Try repeating the setup procedure using another manufacturer's code (if listed for your device).
CH +/–: Switches the cha
3 Press
.
INFO: (DISPLAY) Displ
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see "Searching
The SET indicator flashes three t
for the correct code").
down.
playback information.
ENTER: Enters the selec
OPTIONS: (ANT/SW) S
RM-VZ220_U [US,ES] 4-170-642-12(1)
the antenna output.
RECALL: (DRIVE SELE
the deck.
CH +/–: Switches the cha
INPUT: Changes the inp
down.
1 – 9, 0: Number button
ENTER: Enters the selec
(dot): (+10) Selects nu
and above.
: Opens/closes the dis
PAGE +: (DVD) Selects
drive.
INPUT: Changes the inp
PAGE –: (HDD) Selects
1 – 9, 0: Number button
internal HDD (hard disk
(dot): (+10) Selects nu
FAVORITES: (TOP MEN
and above.
Displays the Top Menu.
: Opens/closes the dis
INFO: (DISPLAY) Displ
PAGE +: (DVD) Selects
playback information.
drive.
OPTIONS: Displays the
PAGE –: (HDD) Selects
menu.
internal HDD (hard disk
RECALL: (DRIVE SELE
FAVORITES: (TOP MEN
Switches between HDD
Displays the Top Menu.
CH +/–: Switches the cha
INFO: (DISPLAY) Displ
down (for DVD recorde
playback information.
ENTER: Enters the selec
OPTIONS: Displays the
menu.
RECALL: (DRIVE SELE
Switches between HDD
CH +/–: Switches the cha
down (for DVD recorde
ENTER: Enters the selec
/
× 8
/
× 1
/
in.)
1
1
8
2
8

Advertisement

loading

  Summary of Contents for Sony RM-VZ220

  • Page 1: Operating Instructions

    INFO: (DISPLAY) Displ and used in accordance with the instructions, may cause harmful interference to radio If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see “Searching SLEEP: Enables the Sleep function (when available).
  • Page 2: Start-Up Guide

    Check that you have set the correct manufacturer’s code. Try repeating the setup procedure using another manufacturer’s code (if listed for your device). If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see “Searching for the correct code”).
  • Page 3: Remote Button Descriptions

    Restoring the factory settings : (PIP STILL) Freezes the INFO: Displays program “window” picture. information. You can clear all the settings and reset the RM-VZ220 to its factory settings. : (PIP SWAP) Switches between OPTIONS: Displays the options “main” and “window” picture. menu.
  • Page 4: Satellite Receiver

    Notes on using the RM-VZ220 : Pauses. playback information. The RM-VZ220 will not perform functions that the device is not designed for. For : Stops. OPTIONS: Displays the options example, if your TV does not have the muting function, MUTING on the RM-VZ220 A: (SET UP) Calls up the system/ menu.
  • Page 5 10630, 10675, 12250 11075 El indicador SET parpadeará tres veces y se apagará. Shinsonic 10533 GoldStar 10741 Sonic Blue 10869 Harman/Kardon 11229 Sony 11633, 10533, 10864, 11033, Hitachi 10573, 10664 11070, 11431, 11516 TV / TV Hiteker 10672 Sylvania 10675 Insignia...
  • Page 6 3 Press See “Remote Button Descriptions” for the functions of buttons for each device. 40775 If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see “Searching USDTV 41535 While keeping SET held do...
  • Page 7: Especificaciones

    : Rewinds. INFO: (DISPLAY) Display If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see “Searching SLEEP: Enables the Sleep function (when available). After you have read through this manual, if you still cannot get the RM-VZ220 to work The SET indicator flashes three times and contaminada del compartimiento de las baterías con un paño y reemplace las baterías...
  • Page 8: Restoring The Factory Settings

    Restoring the factory settings : (PIP STILL) Freezes the INFO: Displays program “window” picture. information. You can clear all the settings and reset the RM-VZ220 to its factory settings. : (PIP SWAP) Switches between OPTIONS: Displays the options “main” and “window” picture. menu.
  • Page 9 Sharp 12250 General 12414, 12432 Sony 11516 4 Cuando el indicador SET comience a parpadear, cuente el número de  SET: Presione para configurar el RM-VZ220. El indicador se enciende o Code No. Brand Code No. 12083 Sylvania 10675 parpadeos.
  • Page 10 Notas sobre el uso del RM-VZ220  INFO: (MOSTRAR) Muestra la  : Detiene.  El RM-VZ220 no puede realizar funciones que el dispositivo no está diseñado para  A: (CONFIGURACIÓN) Muestra información de reproducción. realizar. Por ejemplo, si su TV no tiene una función para silenciar el sonido, la función  OPTIONS: Muestra el menú...