Redring R6508 Handbook page 8

5. Ensure that the removable side section is fitted securely into the back-plate.
6. Re-connect cable to front cover PCB (one way fit)
see diagram 11.
7. Fit the front cover back into position making sure the knob is
aligned correctly with the flow valve (see diagram 12).
TAKE CARE WHEN REPLACING THE FRONT COVER
TO AVOID DAMAGING ANY COMPONENTS.
8. Operate the shower first without the handset to flush out
particles, fit handset and then operate the shower as explained
previously and check:
a) That the water gets to a satisfactory temperature.
b) Power selection does give a change in water temperature.
c) Check again for leaks.
d) That the holes in the spray plate are not blocked.
e) Water flow can be adjusted by knob E
9. DEMONSTRATE OPERATION TO USER
10. LEAVE THESE INSTRUCTIONS WITH THE
USER FOR FUTURE REFERENCE.
8
WARNING!
Diagram 11
Diagram 12