Optional Slim-Line Distribution; Optional Remote Status Panel; Optional Remote Contact Board - Liebert 300 series Installation, Operaton & Maintenance Manual

5.3 OPTIONAL SLIM-LINE
DISTRIBUTION
The Slim-Line Distribution is a cabinet
extension, on the right side of the UPS module,
main circuit breaker is provided with each
installation on the right side of the UPS module,
and adds ten (10) inches to the cabinet width.
Power wiring between the UPS output and the
Slim-Line panelboard is provided by the
and output distribution cables (bottom entry)
are field installed by others. Access clearance of
three (3) feet is required on the right side of the
cabinet. For installation and wiring details refer
5.4 OPTIONAL REMOTE STATUS
PANEL
The Remote Status Panel includes:
Load on UPS Indicator (Green LED)
l
Battery Discharge Alarm (Red LED)
l
Low Battery Reserve Alarm (Red LED)
l
. Load on Bypass Alarm (Red LED)
. UF'S Alarm Condition (Red LED)
. New Alarm Condition (Red LED)
. Audible Alarm
. Lamp Test/Reset Pushbutton
. Audi? Reset Pushbutton.
The panel is provided in a NEMA Type 1
enclosure suitable for walI mounting. Interface
of the panel to the UPS is through
control wiring between terminal strips in the
Figure 2-8,2-g, or 2-10 and Figure 5-7 for
wiring details.
5.5 OPTIONAL REMOTE CONTACT
BOARD
The Rem&e Contact Board includes individual
isolated Form C contacts for: Battery
discharging alarm, low battery reserve alarm,
load on bypass alarm, summary alarm, and new
alarm for a second summary alarm condition. A
terminal strip is provided on the optional alarm
relay board for user connection to the individual
alarm contacts. Refer to Figure 2-3,2-g, or 2-10
and Figure 5-8 for wiring details.
NOTE
The alarm relay board is included as
part of the remote statuspanel
and therefore eliminates the need to add
the remote contact board option when a
remote statuspanel
option kit,
option isprovided.