The 2205 Oscilloscope - Tektronix 2205 Operator's Manual

THE 2205 OSCILLOSCOPE

The TEKTRONIX 2205 Oscilloscope is a rugged, lightweight,
dual-channel, 20 MHz instrument that features a bright, sharply
defined trace on an 80 by 100 mm cathode-ray tube (crt).
Its low-noise vertical system supplies calibrated deflection
factors from 5 mV to 5 V per division at full bandwidth.
Stable triggering is achieved over the full bandwidth of the verti­
cal system. The flexibility and high sensitivity of the trigger sys­
tem provides a range of conveniences such as hands-free trig­
gering with the p eak-to-p eak automatic mode, normal trigger
mode, independent selection of TV line and TV field triggering at
any sweep speed, and single-sweep triggering. The trigger sig­
nal is dc coupled.
Z-axis modulation signal can be applied via a front-panel
connector and the source-selector switches.
The horizontal system provides calibrated sweep speeds from
0.5 s to 100 ns per division.
racy, a X I 0 magnifier circuit extends the maximum sweep speed
to 10 ns per division.
Accessories
The instrument is shipped with the following accessories: opera­
tor's manual, two signal adapters, a power cord, and a power-
cord clamp. Part numbers for these standard accessories, as
well as for other optional accessories, are located in Section 6,
Options and Accessories.
were designed specifically to complement the performance of
your 2205.
2205 Operator' s
An external triggering signal or an external
For greater measurement accu­
The voltage-sensing signal adapters
Operator's Safety Summary
vii