Husqvarna Soff-Cut 150 D Operator's Manual page 8

To do a check of the ON/OFF switch
• Make sure that the engine starts and the blade starts
to rotate when you put the switch in the ON position.
• Make sure that the engine stops immediately when
you put the switch in the OFF position.
Blade block guard and lexan cover
The blade block guard gives protection from the rotating
blade and keeps dust away from the operator.
The primary function of the lexan cover is to keep dust
away from the operator, but it also prevents particle
ejection. Make sure that the lexan cover moves freely up
and down.
8
Roll cage
The roll cage prevents damage to the equipment and
the engine, and prevents injury to the operator.
Belt guard
The belt guard protects the operator from the rotating
sheaves and the belt.
Sheave guard
The sheave guard protects the operator from rotating
bladeshaft sheave.
714 - 002 - 09.04.2018