Using Ethernet Interface To Setup Ethernet Interface - Printronix Auto ID T400 Administrator's Manual

5. 3. 3 Using Ethernet interface to setup Ethernet interface

(1) Connect the computer and the printer to the LAN.
(2) Turn on the printer power.
(3) Start the Configuration Utility by double clicking on the
(4) Select "Ethernet" as the interface then click on the "Setup" button to setup the IP address and port for the
current printer's Ethernet. Click "Exit" button to exit the Ethernet interface setup and go back to
Configuration Utility main screen.
(5) Click on the "Ethernet Setup" button from printer function of Printer Configuration tab to configure the IP
address to be either using DHCP or static.
-
icon.
31 - P220 123-0 0 1_ C