Loading Media In Peel-Off Mode (Option) - Printronix Auto ID T400 Administrator's Manual

3. 2. 3 Loading Media in Peel-off Mode (Option)

4.
Close the peel-off cover and printer cover.
Note:
Make sure the latches of peel-off cover are engaged securely by printer cover.
-
1. Please refer to section 3.2.1 to load the
media. Place the label leading edge onto the
platen roller.
2. Close the top cover gently. Use
"Configuration Utility" to set the media sensor
type, calibrate the selected sensor and set
the post-print action to "PEEL".
Note:
Please calibrate the sensor before loading media
into the peel-off module for avoiding paper jam.
3. Open the top cover and peel-off cover. Feed
the media into peel-off cover slot.
15 - P220 123-0 0 1_ C