Printronix Auto ID T400 Administrator's Manual page 3

Table of Contents

Advertisement

Trademark Acknowledgements
CSA is a registered certification mark of the Canadian Standards Association.
EIA is a registered service mark of the Electronic Industries Association.
IEEE is a registered service mark of the Institute of Electrical and Electronics Engineers, Inc.
TUV is a registered certification mark of TUV Rheinland of North America, Inc. UL is a registered
certification mark of Underwriters Laboratories, Inc.
CG Triumvirate is a trademark of Agfa Corporation.
CG Triumvirate Bold Condensed font is under license from the Monotype Corporation.
Printronix and M4L are trademarks of Printronix Auto ID Technology, Inc.
ZPL and ZPL II are registered trademarks of Zebra Technologies Corporation.
Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners
Notice of Copyright
This document contains proprietary information protected by copyright. No part of this document may
be reproduced, copied, translated, or incorporated in any other material in any form or by any means,
whether manual, graphic, electronic, mechanical, or otherwise, without the written consent of
Printronix Auto ID Technology, Inc.
All non-Printronix registered and/or unregistered trademarks used throughout this manual are the sole
property of their respective owners.
COPYRIGHT © 2016 PRINTRONIX AUTO ID TECHNOLOGY, INC. All rights reserved.
Agency Compliance and Approvals
EN 55022, Class A
EN 55024
EN 60950-1
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC part 15B, Class A
ICES-003, Class A
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer's instruction manual, may
cause harmful interference with radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case you will
be required to correct the interference at your own expense.
This Class A digital apparatus complies with Canadian ICES-003.
-
ii -
P220 123-0 0 1_ C

Advertisement

Table of Contents
loading

Table of Contents