Table of Contents
Advertisement
5. 2 Printer Function
1. Connect the printer and computer with a cable.
2. Select the PC interface connected with bar code printer.
USB interface
The default interface setting is USB
interface. If USB interface is
connected to the printer, no other
settings need to be changed in the
interface field.
3. Click the "Printer Function" button to setup. The detail functions in the Printer Function Group are listed
as below.
Others interface
Description
Calibrate the sensor specified in the Printer Setup group media sensor
field
Setup the IP address, subnet mask, gateway for the on board Ethernet
Synchronize printer Real Time Clock with PC
Initialize the printer and restore the settings to factory default.
Reboot printer
Print a test page
Print printer configuration
To activate the printer dump mode.
Ignore the downloaded AUTO.BAS program
Exit line mode.
Set the password to protect the settings
-
28 -
2
1
P220 123-0 0 1_ C
Advertisement
Table of Contents
