Skip Auto.bas - Printronix Auto ID T400 Administrator's Manual

4.6 Skip AUTO.BAS

TSPL programming language allows user to download an auto execution file to flash memory. Printer will run
the AUTO.BAS program immediately when turning on printer power. The AUTO.BAS program can be
interrupted without running the program by the power-on utility.
Please follow the procedures below to skip an AUTO.BAS program.
1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED becomes solid green.

The LED color will be changed as following:
Amber  red (5 blinks)  amber (5 blinks)  green (5 blinks)  green/amber (5 blinks)  red/amber
(5 blinks)  solid green
4. Printer will be interrupted to run the AUTO.BAS program.
- 26 - P220 123-0 0 1_ C