Setting Ethernet By Configuration Utility; Using Usb Interface To Setup Ethernet Interface - Printronix Auto ID T400 Administrator's Manual

5. 3 Setting Ethernet by Configuration Utility

The Configuration Utility is enclosed in the CD disk \Config_Utility directory. Users can setup the Ethernet by
using RS-232, USB and Ethernet interfaces. The following steps instruct users on configuring the Ethernet
interface.

5. 3. 1 Using USB interface to setup Ethernet interface

(1) Connect the USB cable between the computer and the printer.
(2) Turn on the printer power.
(3) Start the Configuration Utility by double clicking on the
(4) The Configuration Utility is default to USB interface. If USB interface is already connected to the printer, no
other settings need to be changed in the interface field.
(5) Click on the "Ethernet Setup" button from "Printer Function" group in Printer Configuration tab to setup the
IP address, subnet mask and gateway for the printer Ethernet.
-
icon.
29 - P220 123-0 0 1_ C