Features Of Catrax Automatic Clip - digicon catrax automatic clip Product Manual

4. Features of Catrax Automatic Clip

an access controller in the model mini turnstile (column
CATRAX Automatic Clip,
type), destined to individuals with special needs, presents one arm with brushed
stainless steel (AISI 304) finishing and two-directional mechanism, with horizontal
movement. The column can present external finishing in brushed stainless steel (AISI
304) or 1020 carbon steel with electrostatic painting in black epoxy powder. It has
reinforced structure, fully rounded corners, and non-exposed screws, offering space
and comfort for any access control solution. It also has room for a collecting box
(optional item). Aiming at facilitating assembly and maintenance, the column
presents a U-shaped internal support (mounting rack) with
CATRAX Automatic Clip
standard holes for the fixation of additional electronic boards. Moreover, the clients,
according to their needs, can add additional holes. Access to the mounting rack is
done through a key with secret, and the removal and insertion are done through the
frontal door.
A plastic cover and a stainless steel sheet compose the upper panel. The cover, made
of injected plastic, can be purchased in stainless steel or black (other colors available
on demand). Optionally, the cover can present a slot for the reading of magnetic
cards/badges and barcodes. The upper cover in stainless steel allows easy
configuration and low-cost customization of the product. The sheet can also present
slots for optional items, such as pictogram, collecting box input, display kit, or a
combination of these items.
07