Table Of Contents; Introduction - Husqvarna CG 200 Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................5
Assembly........................................................................ 7
Operation........................................................................ 8
Maintenance................................................................. 10
Product description
To be used on concrete, asphalt, paint and other
coatings, glue and steel, and should not be used for any
other purpose than described in this manual.
2
Contents
Troubleshooting............................................................ 11
Transportation, storage and disposal........................... 12
Technical data.............................................................. 12
Service..........................................................................13

Introduction

Intended use
For scarifying, milling grooving, texturing, and cleaning.
130 - 003 - 18.08.2017