Items Supplied; More Items Required - Danfoss VLT FC Series Installation Manual

Installation Guide | Control Card VLT® FC Series
Voltage [V] Minimum waiting time (minutes)
525–690 –
690 –
Table 5: Discharge Time, VLT® Lift Drive LD 302
Voltage [V]
380–480

1.3 Items Supplied

The following is supplied:
• Control card.
1.4 Tools
Only 2 tools are required for replacing the control card:
• Torx 10 screwdriver.
• Flat-head screwdriver.

1.5 More Items Required

• An FC Series drive.
4 | Danfoss A/S © 2018.09
1.5–7.5 kW 11–75 kW
(2–10 hp) (15–100 hp)
– –
Minimum waiting time (minutes)
4
0.25–7.5 kW
(0.34–10 hp)
37–315 kW 355–1200 kW
(50–450 hp) (450–1550 hp)
55–315 kW –
(75–400 hp)
15
11–75 kW
(15–100 hp)
AN279051429263en-000101 / 130R0788
Introduction
355–2000 kW
(450–2050 hp)
355–710 kW
(400–950 hp)
–