Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BC25
Summary of Contents for Trotec BC25
- Page 1 BC25 ORIGINAL INSTRUCTIONS THERMOHYGROMETER...
-
Page 2: Table Of Contents
• Remove the batteries from the device if you will not be using the device for a longer period of time. • Never short-circuit the supply terminal in the battery compartment! thermohygrometer BC25... - Page 3 Do not use the device in potentially explosive atmospheres, for untrained people in an unprofessional or improper way! measurements in liquids or at live parts. Trotec accepts no Observe the personnel qualifications! liability for damages resulting from improper use. In such a case, any warranty claims will be voided.
-
Page 4: Information About The Device
Device description specify the effects of the current climate on the human body. The thermohygrometer BC25 can be used to determine the air, Unlike the heat index, the WBGT does not only incorporate the dew point and wet-bulb temperature as well as the humidity air temperature (dry-bulb temperature) and humidity level, but level of indoor areas. - Page 5 Measuring sensor Air temperature unit °C / °F indication Display Measurement value indication Mode button Wet bulb indication Hold button Dew point indication Power button Relative humidity indication Battery compartment with cover HI indication (heat index) Temperature indication thermohygrometer BC25...
- Page 6 Operating conditions -20 °C to 50 °C, <80 % RH (non-condensing) Storage conditions -10 °C to 50 °C, <80 % RH (non-condensing) Automatic switch-off after approx. 15 minutes Power supply 1 x CR2032 battery Scope of delivery • 1 x Thermohygrometer BC25 • 1 x Quick guide thermohygrometer BC25...
- Page 7 46 °C to 53 °C Danger: Overheating, stop all activities above 54 °C Danger: Potentially fatal heat stroke Source: www.eurometeo.com Info The index is only intended to provide a basis of information. Personal perceptions and heat-related effects may differ. thermohygrometer BC25...
-
Page 8: Transport And Storage
ð The display will be switched on and the device ready for operation. ð The TEMP indication (20) and the currently measured temperature value are displayed. 2. Point the device at the area to be measured. ð Wait for a moment to achieve a stable measured value. thermohygrometer BC25... - Page 9 4. Afterwards repeatedly press the Power button (5) until the measured temperature value is displayed again. Setting the HOLD function 1. Press the Hold button (4). ð The current value will be held. 2. Press the Hold button (4) again. ð The display again indicates the current measured value. thermohygrometer BC25...
-
Page 10: Maintenance And Repair
10. Press the Power button (5) to save the alarm value for the flashes or the device can no longer be switched on (see chapter WBGT index. Inserting the batteries). ð The display again indicates the current measured value. ð The selected settings are saved. thermohygrometer BC25... -
Page 11: Disposal
You can also find out about other return options that apply for many EU countries on the website https://hub.trotec.com/?id=45090. Otherwise, please contact an official recycling centre for electronic and electrical equipment authorised for your country. - Page 12 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...