DREAMS Yardley Single Ottoman Assembly Instructions Manual

Advertisement

Quick Links

Yardley Single Ottoman
Assembly Instructions
Dimensions mm
Length
2040
Single
Need assistance?
Call: 0344 292 0000

Helpful advise before you begin:

1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children's reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Width
Height
1010
910
1/2
Page 1 of 7
You will require a cross
head screwdriver
2 x people recommended to
assemble this product
Approximate time to
assemble this product
Retain these instructions
for future reference
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Yardley Single Ottoman and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DREAMS Yardley Single Ottoman

  • Page 1 9. Please do not use substitute parts. Use only additional or Do not discard any of the replacement parts supplied by Dreams Ltd. packaging until you have 10. In the unlikely event that this product has missing or damaged checked that you have all the parts, please call 0344 292 0000 to obtain spares.
  • Page 2 Parts Checklist before assembly the bed, please open Do not discard any of the the zipper at the back of headboard packaging until you have and find the hardware pack(fittings A-R), checked that you have all the footboard(03),bottom cover(05) and bar parts and the pack of fixings.
  • Page 3 Bed Frame Assembly ADDITIONAL TOOLS (not supplied) Philips head screwdriver Loosely insert bolts (B) into each side of headboard (1) and foot board (2). Note: Do not tighten fully but leave 10mm protruding. Bolts (M8x25) Allen Key (M8) Attach the side rails to the headboard and footboard. Make certain the bed is squared up, then tighten all bolts fully. Attach the corner brackets to the headboard and footboard.
  • Page 4 Bed Frame Assembly Turn the bed on its side and attach the fabric base to the bottom of the side rails, headboard and footboard. Note: Make sure the fabric is fixed evenly all around. Attach the fabric base to the bottom before assembling the feet.
  • Page 5 Bed Frame Assembly Put the slat frame on the lift mechanism, use three sets of bolts (E), flat washers (J) and nuts (H) to loosely fit the slat frame to the first four holes on each side of the lift nearest to the headboard, finger tight. Do not fully tighten all the bolts before confirming the metal frame is in correct position.
  • Page 6 Bed Frame Assembly Wrap the handle strap to the frame as the diagram. NOTE: When fully assembled and the mattress is in position, please raise and lower the ottoman 4-5 times. To ensure the gas pistons are fully lubricated. Strap Page 6 of 7...
  • Page 7 For online and telesales orders, you can only return an item within www.dreams.co.uk 14 days from the date of your delivery. Thank you for purchasing from Need assistance? Call: 0344 292 0000 Dreams reserve the right to modify products, dimensions, parts and fixings whithout notification. Page 7 of 7...

Table of Contents