Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DREAMS Abbey Bed Single
Summary of Contents for DREAMS Abbey Bed Single
- Page 1 Abbey Bed Single 3/4 hour approx Two person assembly time assembly...
-
Page 2: Assembly Tips
Thank you Hello, thanks for choosing to purchase your bed from our company- you're now on your way to creating a practical and stylish solution for your room. Before you begin building your bed, please take a moment to read through the instructions and make sure that you've got all the relevant parts listed on the following pages. -
Page 3: Parts List
Parts Important infomation The bed you have purchased comes with 3 different base options; solid slats, sprung slats or with Sleepmotion. Please identify which base you have purchased as the assembly method may change. If you have purchased solid or sprung slats please follow the instructions below in the current order. If you have purchased a Sleepmotion base, please build the Sleepmotion base first following the instructions provided in that box. -
Page 4: Tools Required
Fittings Please check you have all the parts listed below with your product: A x 10 B x 4 C x 6 D x 14 E x 6 Bolt (M6 x 20mm) Bolt (M5 x 35mm) Bolt (M5 x 25mm) Metal Washer (Ø16) Metal Washer (Ø21) G x 8... - Page 5 Assembly Assembly HEADBOARD ASSEMBLING Attached Headboard Leg (2) to the Headboard (1). Fully tighten Bolt by Allen Key (N) provided. HEADBOARD & FOOTBOARD ASSEMBLING To loosely tighten Bolts to Headboard (1) and Footboard (3) using Bolt (A), Metal Waher (D), Rubber Washer (G). Left Bolt 10mm in out side in this step.
- Page 6 Assembly Assembly SLAT SYSTEM ASSEMBLING Identify the slat system your have purchased... Sprung slat system Turn to steps A Standard wooden slat system Adjustable Foot Turn to step B,C & D Abbey Bed - Assembly Guide - Page 6...
- Page 7 Assembly Assembly SLAT SYSTEM ASSEMBLING Put the sprung slat system(5) on the bedframe, Fully tighten using Bolt (B), Inner bolt (F), Metal washer (D), Metal washer(E). SLAT SYSTEM ASSEMBLING Take out standard wooden slat sysem (6). Take out Center legs (I), make sure the foot can be adjustable.
- Page 8 Assembly Assembly Fit the adjustable support wooden leg to the centre slat (there is a pre-drilled hole on the centre slat) as shown. Assembling center leg (I) to the slat sysem, fully tighten Tapping Screw(H) using cross screwdriver (Not provided). Fit the adjustable support wooden leg to the centre slat (there is a pre-drilled hole Adjustable Foot...
-
Page 9: Care And Maintenance
Care and maintenance Here are some tips to keep your new bed in tip-top condition Cleaning To clean your new bed, we'd advise using a warm damp cloth - please do not use abrasive chemicals or bleach as this may damage the product. Checking and moving Periodically we recommend you check that the screws or fixtures haven't been become loose, over time. - Page 10 Little dreamers Keep the little ones entertained while you assemble your new purchase.
Need help?
Do you have a question about the Abbey Bed Single and is the answer not in the manual?
Questions and answers