ABB LMT100 Operation Instructions Manual page 60

60
Menu: Device Info (continued)
Menu/Parameter
Serial Number
Serial Number
Device Configuration
Device Configuration
Mount Orientation
Mount Orientation
Sensor
Sensor ID
Type
Probe Length
SW Version
HW Version
FPGA Version
Sensor Low Limit
Sensor High Limit
Sensor Offset
Electronics
SW Version
HW Version
Display
SW Version
HW Version
L M T S E R I E S | M A G N E TO S T R I C T I V E L E V E L T R A N S M I T T E R | O I/ L M T 1 0 0/ 2 0 0 - E N R E V. B
Value Range
14 digit
Alphanumeric value
3K78
1 Level
1 Level + Temperature
2 Levels
2 Levels + Temperature
Default: 1 Level
Top, Bottom
Default: Top
ABB FE01
Magnetostrictive
0-3500 cm
xx xx xx
xx xx xx
xx xx xx
-0.2 * probe length
Default: -700.0 cm
1.2 * probe length
Default: 4200.0 cm
Default: 0.0 cm
xx xx xx
xx xx xx
xx xx xx
xx xx xx
Description
Indicates specific device identification number
Defines the application use of the device, users
can change the measurement from single level to
two levels However, if the device is not equipped
with an RTD, then the temperature option will not
be available
Physical mounting position of housing to probe
Device technology