Safety; A) International Symbols; B) Important Safety Precautions; C) Safety Features - Sefa DUPLEX PRO Instruction Manual

1. SAFETY

THIS MACHINE IS DESIGNED FOR USE BY A SINGLE OPERATOR

a) International symbols

O
OFF
I
ON
DANGER, WARNING

b) Important safety precautions

Personal protective equipment should be worn (e.g. safety gloves and glasses).
Do not touch hot parts of the machine during use.
Do not place hands between the platens when the machine is switched on.
Make sure the operator is not exposed to risks of burns, electrocution or other hazards when handling the
machine.
Check the machine each day before use.
Make sure there is nobody in the vicinity of the machine before starting work.
If the machine malfunctions, cut the power supply and look for the cause of the problem (see the Servicing
section).

c) Safety features

No changes must be made to the safety covers and safety systems.
They must be refitted if they are removed for servicing work.
They must be held securely in place and kept in good condition during normal use.
DUPLEX PRO presses are fitted with safety systems to protect the operator from pinch-point hazards.
The main safety components are:
Emergency stop button
Front-mounted button that switches the machine off when pressed.
Safety cover
Two contact switches are located on top of the upper heat platen.
This system helps safeguard the operator against pinch points and crushing hazards.
If the system detects an obstacle, it raises the heat platen, immediately shuts off the swing function and puts the
press into safe mode.
To restore the machine to operating mode, press the RESET button, position the swing arm over one of the lower
platens and depress the foot pedal.
FOR USE BY QUALIFIED PERSONNEL
Page no. 5
HOT SURFACE
ELECTROCUTION HAZARD
English version
V0516