Electronic Board Settings; A) Presets; B) Settings Menus - Sefa DUPLEX PRO Instruction Manual

6. ELECTRONIC BOARD SETTINGS

a) Presets

This menu contains nine pre-saved operating programs; up to five presets can be assigned to each program by
entering the required setpoints.
The operating programs must be suited to the processes you use. The temperature adjustment system is fine-
tuned for each program.
Browse between
program presets
Available programs:
Customised: the system applies the user-defined settings keyed in at the control panel
Flex: for placing flex and flock
DTG 1: for drying pre-treated materials
DTG 2: for pressing pre-treated materials
SUBLI T: for sublimation printing on textiles
SUBLI R: for sublimation printing on rigid materials
SCREEN: for placing screen transfers
LASER: for placing laser transfers
QUICKFLEX: for placing flex in under 5 seconds

b) Settings menus

Press the green key in the centre of the screen to open the settings.
Click to open the required menu.
Press the arrow in the bottom centre of the screen to exit.
End-of-cycle beeper time
setting
Sleep mode
Machine settings
Page no. 9
English version
V0516
Browse between
programs
User comfort settings
Energy saving mode
Diagnostic mode
To next screen