Banner Registration Mark Sensor R58 Expert Brochure page 2

Registration Mark Detection
Objective: To detect registration marks on food packaging.
Description: The R58 Expert automatically chooses one
of three sensing LEDs – red, green or blue to maximise
contrast when detecting registration marks.
Power LED
Dynamic TEACH (+)
Push Button
Dark Operate LED
Light Operate LED
Static TEACH (-)
Push Button
Horizontal spot position
Vertical spot position
Authorised distributor:
Output LED
ON-Delay
Switch Point
8-Segment
Light Bar
On-axis or right-angle
lens position possible
Splice Detection in a Paper Roll
Objective: To identify splices on a roll of paper.
Description: The highly sensitive R58 Expert detects the
inconspicuous splice in a roll of paper, ensuring that the
printer skips over the splice.
Tube Registration Mark Detection
Objective: To detect registration marks on tubes for
correct positioning before filling.
3 LED colours
available
Versions available with
M12x1 connector (5-pin)
SENSORS
BANNER ENGINEERING EUROPE
Park Lane, Culliganlaan 2F Tel: +32 2 456 07 80
1831 Diegem • Belgium Fax: +32 2 456 07 89
or cable
SAFETY VISION
E-mail: mail@bannereurope.com
Web: www.bannereurope.com