Advertisement
7.3.2 Clock setup－the settings for the clock.
Screen
1 Transition to the setup mode
（1） Push the Setup key in operation mode.
（2） 2-1 will be displayed.
2 Clock setup
EMU2-HM1-
（
2-1.
（1） In 2-1, Push the ▲ or ▼ key, and move the cursor to the "Clock".
[Setup]
（2） Push the
1 Measure
（3） 2-2 will be displayed.
2
Clock
3 Display
2-2.
（1） Push the ▲ or ▼ key , and move the cursor to the "Year".
[Clock]
（2） Push the ＋ or － key, and change the set value.
2003/01/01
（3） Push the ▼ key, and move the cursor to the "Month".
00:00
OK
（4） Push the ＋ or － key, and change the set value.
（5） In a similar way, change the "Day","Hour","Minute".
（6） After setting all of the items, push the ▲ or ▼ key, and move the
cursor to the "OK".
（7） Push the
3 to exit the the setup mode
3-1.
（1） In 2-1, Push the Setup
Quit Setup
（2） Push the ▲ or ▼ key, and move the cursor to the "2 Not Save".
1
Save
Push the
2 Not Save
3 Cancel
（3） Return to the operation mode, and it will be displayed electric energy screen.
*In case of the model EMU2-BM1-B, EMU2-PM1-P, because it does not have a clock function, can not clock set.
*Setting for clock can only be in the display unit is set to master.（Setting for clock can not be in the display unit is set to slave.）
*If you change a settings, please push the
*The underline means the default of setting. After you have been set, even if a power failure occurs does not disappear setting.
7.3.3 Display setup－Setup about display such as LCD contrast or backlight lighting pattern.
Screen
1 Transition to the setup mode
1-1.
（1） Push the Setup key in operation mode.
[Setup]
（2） 1-1 will be displayed.
1 Measure
（1） In 1-1, Push the ▲ or ▼ key, and move the cursor to the "3 Display".
2 Clock
3
Display
（2） Push the
（3） 2-1 will be displayed.
2 Setup the LCD contrast
2-1.
（1） Push the
[Display]
（2） Push the
1
Contrast
（3） 2-2 will be displayed.
2 Backlight
0 Back
2-2.
（1） Push the ＋ or － key, and change the LCD contrast value.
[Contrast]
（2） Push the
－
＋
（3） 2-1 will be displayed.
3 Setup the backlight
3-1.
（1） Push the ▲ or ▼ key, and move the cursor to the "2 Backlight".
[Display]
（2） Push the
1 Contrast
（3） 3-2 will be displayed.
2
Backlight
0 Back
3-2.
（1） Push the ▲ or ▼ key , and select the backlight condition.
[Backlight]
（2） Push the
Auto OFF
（3） 3-1 will be displayed.
Always ON
4 Save the settings
4-1.
（1） After setting all of the items, push the Setup key.
Quit Setup
（2） 4-1 will be displayed.
1
Save
（3） When save the settings, push the ▲ or ▼ key, move the cursor to
2 Not Save
3 Cancel
the "1 Save", and Push the
（4） After completing the settings saving, "Completed" message will be
displayed. Push the
（5） Return to the operation mode, and it will be displayed electric energy screen.
*If you change a settings, please push the
*The underline means the default of setting. After you have been set, even if a power failure occurs does not disappear setting.
*If you want to set the other circuit, push the Circuit key on the "Setup" screen (1-1), select the circuit, make the setting.
Operation
△
△，
, EMU2-VS1-P, EMU2-RD□-
/ Phase key.
/Phase
key, and clock setting changed.
key.
/ Phase key.
/ Phase key and be sure to determine changes. If without determine, the changes will be discarded.
Operation
/ Phase key.
▲ or ▼ key, and move the cursor to the "1 Contrast".
/ Phase key.
/ Phase key.
/ Phase key.
/ Phase key.
/ Phase key.
/Phase key.
/ Phase key and be sure to determine changes. If without determine, the changes will be discarded.
△）
MDU2-□-
note 1
Note 2
- 15 -
[Year]：00⇔01⇔02⇔03⇔04⇔...⇔99⇔
[Month]：01⇔02⇔03⇔04⇔...⇔12⇔
[Day]：01⇔02⇔...⇔29⇔30⇔31⇔
[Hour]：00⇔01⇔...⇔12⇔13⇔...23⇔
[Minute]：00⇔01⇔...⇔59⇔
note 1：Setting range of day will change depending
on the setting of the year and month.
note 2：It becomes "00" second when thetiming of
pushing the
setup screen.
Note 1：If change the measurement settings and
the d
Note 1
isplay settings,select the "1 Save".
[Contrast]
：■□□□□□□□⇔
■■□□□□□□⇔
■■■□□□□□⇔
■■■■□□□□⇔
■■■■■□□□⇔
■■■■■■□□⇔
■■■■■■■□⇔
■■■■■■■■
[Backlight]：Auto OFF⇔Always ON
Auto OFF: If 5 minute has passed since the
last key operation, backlight will
be OFF automatically. There are
any key operation, backlight wll
be lighted again.
Always ON: Backlight is always lighted.
1 Save
→ Save settings and return to
the operation mode.
2 Not Save → Discard the changes and
return to the operation mode.
3 Cancel
→Continue the setup.
Note
/Phase
key at the clock
Note
Pale
Dark
Advertisement
