Advertisement
7.2.4 Logging setup－the settings for the logging ID （Set only EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB connected the EMU4-LM.）
Screen
1 Transition to the setup mode
1-1.
（1） Push the Setup key in operation mode.
[ Setup ]
（2） 1-1 will be displayed.
2 I/O
（1） Confirm that the cursor focuses the "4 Logging", and push the
3 COM.
4
Logging
key.
（2） 2-1 will be displayed.
2 Setup the logging unit ID
2-1.
（1） In 2-1, Push the ▲ or
[ Logging ]
（2） Push the
1
ID
（3） 2-2 will be displayed.
2 Data clear
0 Back
2-2.
（1） Push the ▲
[ ID ]
（2） Push the
001
（3） 2-1 will be displayed.
3 Save the settings
3-1.
（1） After setting all of the items, push the Setup key.
Quit Setup
（2） 3-1 will be displayed.
1
Save
（3） When save the settings, push the ▲ or ▼ key, move the cursor to
2 Not Save
3 Cancel
the "1 Save", and Push the
（4） After completing the settings saving, "Completed" message will be
displayed. Push the
（5） Return to the operation mode, and it will be displayed electric energy screen.
*If you change a settings, please push the
*The underline means the default of setting. After you have been set, even if a power failure occurs does not disappear setting.
*If you want to set the other circuit, push the Circuit key on the "Setup" screen (1-1), select the circuit, make the setting.
7.2.5 Clock setup－the settings for the clock. （Set only EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB connected the EMU4-LM）
Screen
1 Transition to the setup mode
1-1.
（1） Push the Setup key in operation mode.
[ Setup ]
（2） 1-1 will be displayed.
3 COM.
（1） Confirm that the cursor focuses the "5 Clock", push the
4 Logging
5
Clock
（2） 2-1 will be displayed.
2 Clock Setup
EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB
（
2-1.
（1） In 2-1, Push the ▲ or ▼ key , and move the cursor to the "Year".
[ Clock ]
（2） Push the ＋ or －
2013/01/01
（3） Push the ▼ key, and move the cursor to the "Month".
00:00
OK
Cancel
（4） Push the ＋ or －
（5） In a similar way, change the "Day","Hour","Minute".
2-2.
（6） After setting all of the items, push the ▲ or ▼ key, and move the
Logging data
cursor to the "OK".
Will be
（7） Push the
Cleared.
OK
Cancel
（8） 2-2 will be displayed.
（9） When to exit the clock setup, push the ＋ or － key, and move the cursor
to the "OK", and push the
（10）After completing the settings saving, and 1-1 will be displayed.
*If change a settings, please push the
*The underline means the default of setting. After you have been set, even if a power failure occurs does not disappear setting.
*If you want to set the other circuit, push the Circuit key on the "Setup" screen (1-1), select the circuit, make the setting.
7.2.6 Display setup－Setup about display such as LCD contrast or backlight lighting pattern.
Screen
1 Transition to the setup mode
1-1.
（1） Push the Setup key in operation mode.
[ Setup ]
（2） 1-1 will be displayed.
4 Logging
（1） Confirm that the cursor focuses the "6 Display", push the
5 Clock
6
Display
（2） 2-1 will be displayed.
2 Setup the LCD contrast
2-1.
（1） In 2-1, push the ▲ or ▼ key, and move the cursor to the "1 Contrast".
[ Display ]
（2） Push the
1
Contrast
（3） 2-2 will be displayed.
2 Backlight
0 Back
2-2.
（1） Push the ＋ or － key, and change the LCD contrast value.
[ Contrast ]
（2） Push the
－
＋
（3） 2-1 will be displayed.
3 Setup the backlight
3-1.
（1） In 3-1, push the ▲ or ▼ key, and move the cursor to the
[ Display ]
"2 Backlight".
1 Contrast
（2） Push the
2
Backlight
0 Back
（3） 3-2 will be displayed.
Operation
EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB
（
▼ key, and move the cursor to the "1 ID".
/ Phase key.
▼ ＋
－ key , and change the logging unit ID.
/ Phase key. Confirm the setting value.
/ Phase key.
/Phase key.
/ Phase key and be sure to determine changes. If without determine, the changes will be discarded.
Operation
key. Change the set value.
key. Change the set value.
/ Phase key, and clock setting changed.
/ Phase key.（If select the "Cancel", return to 1-1）
/ Phase key and be sure to determine changes. If without determine, the changes will be discarded.
Operation
/ Phase key.
/ Phase key.
/ Phase key.
/ Phase
）
/ Phase
key.
）
Note 1
Note 2
/ Phase key.
- 12 -
Note
[ ID ] ：001～255
1 Save
→ Save settings and return to
the operation mode.
2 Not Save → Discard the changes and
return to the operation mode.
3 Cancel
→Continue the setup.
Note
[ Year ] ：00⇔01⇔02⇔...⇔13⇔...⇔99⇔
[ Month ] ：01⇔02⇔03⇔04⇔...⇔12⇔
[ Day ] ：01⇔02⇔...⇔29⇔30⇔31⇔
[ Hour ] ：00⇔01⇔...⇔12⇔13⇔...23⇔
[ Minute ] ：00⇔01⇔...⇔59⇔
Note 1：The setting range of the day changes with
setting in the year and the month.
Note 2：It becomes "00" second when thetiming of
pushing the
/Phase
setup screen.
Note 3 ： The logging data stored in EMU4-LM is
deleted if clock setting is changed. Measured
data stored in SD card is not deleted.
Note
[Contrast] ： ■□□□□□□□⇔
■■□□□□□□⇔
■■■□□□□□⇔
■■■■□□□□⇔
■■■■■□□□⇔
■■■■■■□□⇔
■■■■■■■□⇔
■■■■■■■■
[ Backlight ] ：Auto OFF⇔Always ON
Auto OFF...If 5 minute has passed since the last key
operation, backlight will be OFF
automatically. There areany key operation,
backlight wll be lighted again.
Always ON...Backlight is always lighted.
key atthe clock
Pale
Dark
Advertisement
