Table of Contents
Advertisement
8.5 -
A generic alarm message will only be transmitted if the installer has
connected and programmed the system accordingly.
When a generic message is sent, the system checks the alarm source. If the
alarm source is still active (i.e. seat still open), the input will be inhibited. If no
longer active (i.e. seat closed), the system will automatically rearm
Wireless sensors can be added to protect the area where the vehicle is usually
parked; if one of the sensors detects an alarm condition, an alert message will
be sent to the user mobile phone
9.0 - COMMANDS FROM AND TO MOBILE PHONE
Before configuring the module, it is important to familiarize yourself with all the
commands available to interact with the system.
Messages for system management (commands) are forwarded to the same
mobile from which they have been transmitted (except tracking and vehicle
immobilizing confirmation).
Alarm messages are received by the preset mobile numbers.
The code for requesting speed alert and vehicle position must always be a
3-digit number (factory pre
If a text message is sent with the wrong command, you will receive an
NB: the time indicated by the system refers to the Greenwich Mean Time (GMT).
GENERIC ALARM (GREEN-BROWN wire
ATTENTION
8.6 - WIRELESS SENSORS ALARM
.
ATTENTION
ATTENTION
error message (command error).
set
as "000", three zeros).
)
.
Advertisement
Table of Contents
