Table of Contents
Advertisement
setup#password#version#main phone number#new
The initial configuration command must be sent to the control unit to notify the
"password", "system model" and "phone number" for the alert notifications:
- setup#:
configuration command.
- password#:
The new password
and letters (i.e.: AA1234 or aa1234). The password is key-sensitive,
therefore by typing characters other than the ones entered (
lower case
letters are not equivalent), the system will not operate properly.
Commands
-Version#:
system model (in this case BASIC).
-Main phone number#:
alarm condition
-New password#:
-Emergency phone number#:
of an alarm condition (optional, entering can be omitted).
To confirm reception of an SMS, the system triggers 5 quick flashes of the turn
indicators and the LED and returns a confirmation message to the user
indicating:
setup ok with password=new password.
9.1 - INITIAL CONFIGURATION:
password#emergency phone number#
factory preset password "000000", six zeros.
must be a 6-digit code and can contain both numbers
can either be sent with capital or small letters.
number to which the SMS will be sent in case of an
always preceded by the international code
user-chosen password (6 digit-code mandatory).
ATTENTION
second recipient to receive an SMS in case
upper
and
(i.e. +44 for the UK).
Advertisement
Table of Contents
