Commands - Gemini gtrack 7855 MyBASIC User Manual

REQUEST
Initial configuration and/or
data modification
Initial configuration and/or
data modification with STOP
& GO activation
Initial configuration and/or
data modification with STOP
& GO deactivation
Initial configuration with
sensor exclusion
data modification
Vehicle localization
Tracking ( vehicle movement
Speed alert
Engine immobilizer activation
Engine immobilizer disabling
Blinker and siren (optional)
activation
System arming
System disarming
System status
System passive arming
Periodic position control
Auxiliary input setup
(AUX)
(Ref.01) Speed limit indicative value (expressed in km/h, always 3 digits
(Ref.02) 'x' : 0 = disable, 1 = enable passive arming .
(Ref.03) Indicative value for the time interval after which vehicle position must
be checked (expressed in minutes, always 3 digits).
(Ref.04) See installer manual.

15.0 - COMMANDS

setup#password#version#main phone
number#new password#emergency phone
setup#password#version#main phone
number#new password#emergency phone
setup#password#version#main phone
number#new password#emergency phone
tilt setup#password#nav#main phone
and/or number#new password#emergency phone
)
COMMAND
number#
number#f#
number#s#
number
loc#password#
trk#password#
speed#password#060
stop#password#
go#password#
blinker#password#
on#password#
off#password#
status#password#
pas#password#x,0#
pos password #
aux#password#n
#
(ref.01)
(ref. 02)
#180 (ref.03)
(ref.04)
.
)