Arming; Disarming - Gemini gtrack 7855 MyBASIC User Manual

To arm the system press once on the remote control button or touch the
electronic key to its receptacle.
The LED and the turn indicators will blink twice to confirm arming.
With the electronic key, the system arms immediately but there is a 60"
delay period within which no alarm is detected.
While the system is armed and, until it is disarmed, the vehicle cannot be started.
The passive arming feature, enabled via SMS (see chapter 9.14 or 15.0),
automatically arms the system 2 minutes after ignition is switched "OFF".
To exclude auto-arming proceed as follows:
!
Turn ignition key "ON" and wait for the LED to light up.
!
Within 10" from LED ignition, insert the electronic key in its receptacle.
!
Passive arming exclusion is confirmed by 4 optical signals.
!
Turn ignition key "OFF".
Passive arming exclusion is bound to a single arming cycle.
To restore passive arming, turn ignition key "ON" and then "OFF".
To disarm the system press once on the remote control button or insert the
electronic key in its receptacle.
The LED and the turn indicators will blink 3 times to confirm disarming; the
vehicle can then be started.

4.0 - ARMING

ATTENTION
ATTENTION

5.0 - DISARMING