Table of Contents
Advertisement
Upon request, the system sends 6 SMS (1 approx. every 90 seconds, the first
one to the sender and the other 5 to the user), indicating:
GPS status; latitude; longitude; speed; hour; date.
The last 3 digits "060" stand for the speed expressed in km/h. If this speed is
exceeded for more than 20", the system sends the user (after 20") a speed
alert SMS (indicating vehicle position, time, date, etc). When the engine is
switched "OFF", a second SMS will be sent with the top speed reached.
If the maximum speed is exceeded for less than 20", the system will send a
"maximum speed exceeded" message when the engine is turned off.
To avoid receiving this message, set speed value as "000" (three zeros).
At this request, the sender will receive a confirmation message.
When the engine is cut-off (vehicle stopped with GPS speed zero), the system
will send the user an SMS indicating engine stop and vehicle position (latitude;
longitude; speed; hour; date).
When the engine immobilizer is disabled, the system sends an SMS to the user
to confirm operation.
The engine immobilizer can ONLY be disabled via SMS or with the
9.6 - TRACKING
(VEHICLE DISPLACEMENT):
trk#password#
9.7 - SPEED CONTROL:
speed#password#060
9.8 - ENGINE IMMOBILIZER ACTIVATION:
stop#password#
9.9 - ENGINE IMMOBILIZER DISABLING:
go#password#
electronic key.
ATTENTION
Advertisement
Table of Contents
