Exmark LAZER Z Series Operator's Manual page 16

Safety
PTO Switch Symbols
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. It is important that each operator review the slope operation
instructions in the operator's manual and review the conditions in which the machine is being operated to determine
if the machine may be operated in the conditions that day and on that site. Changes to terrain can result in a
1. Warning-Read the Operator's Manual. Do Not operate this
machine unless you are trained. Wear hearing protection.
2. Cutting and pinching hazard - keep hands and feet away
from moving parts; keep all guards and shields in place.
3. Ramp hazard - when loading onto a trailer, do not use
dual ramps; only use a singular ramp wide enough for the
machine and that has an incline less than 15 degrees;
back up the ramp (in reverse) and drive forward off the
ramp.
decalptoswitch
126-8383
change in slope operation for any machine.
4. Bodily harm hazard - look behind you when mowing in
5. Thrown object hazard - keep bystanders away.
6. Tipping hazard on slopes - do not use on slopes near open
16
Fuel Cap
1. Diesel
reverse.
water; do not use on slopes greater than 15 degrees.
g232519
2. Biodiesel Ready — Read
the Operator's Manual.
decal126-8383