Exmark LAZER Z Series Operator's Manual page 17

1. Engine—Off
2. Engine—On
3. Engine—Start
1. Read the instructions before
servicing or performing maintenance
2. Time interval
3. Check engine oil level
4. Check coolant level; refer to the
Operator's manual for further
instructions
126-9278
Models with 60 or 72 Inch Decks
4. Push the bottom of the button to lower the deck.
5. Push the top of the button to raise the deck.
126-9279
Models with 60 or 72 Inch Decks
5. Check tire pressure (2 locations)
6. Check hydraulic oil level; refer to
the Operator's manual for further
instructions
7. Check oil level in gearbox
8. Grease deck drive PTO; refer to the
Operator's manual for instructions
17
9. Check the air cleaner
10. Grease idler pivot; refer to the
Operator's manual for further
instructions
11. Grease front caster wheel bearings;
refer to the Operator's manual for
further instructions (2 locations)
12. Grease front caster pivots; refer to
the Operator's manual for further
instructions (2 locations)
Safety
decal126-9278
decal126-9279