Zoom H3-VR Quick Manual page 12

Item
System
Language
USB
BTA-1
(This menu item only appears when a BTA-1 is
connected.)
Date/Time
Time Display
LCD
Battery
SD card
Versions
Factory Reset
Audio I/F
Card Reader
Explanation
This sets the date/time and date display format.
(YYMMDD/MMDDYY/DDMMYY)
Set how the counter appears on the display during
recording and playback.
(During recording: Elapsed Time/Remaining Time)
(During playback: Elapsed Time/Remaining Time)
The time until the display backlight turns off and the
display contrast can be set.
(Backlight: Off/On/30 sec/1 min/2 min/3 min/4
min/5 min)
(Contrast: 1–10)
Select the type of batteries used in the
(Alkaline/Ni-MH/Lithium)
The microSD card can be formatted and tested for
performance.
The firmware versions can be checked.
The factory default settings can be restored.
This sets the language shown on the display.
input signals can be input directly to a
computer or iOS device, and playback signals on
a computer or iOS device can be output from the
.
Use a computer to check the files saved on the
microSD card and copy those files to the computer.
Make this setting when a dedicated BTA-1 Bluetooth
adapter is used to enable control of the
from an iOS device.
(Off/On)
12
.