Zoom H3-VR Quick Manual page 11

List of functions and settings
When the home screen is open, press
functions and settings.
Item
Finder
Input/Output
Mic Position
Rec Settings
to open the MENU screen where you can use the following
Lo Cut
Limiter
Ambisonic Monitor
Line Out level
Rec Mode
Rec Format
Rec File Name
Sound Marker
Explanation
This shows the folders and files on the microSD
card.
This function can reduce noise, including air-condi-
tioning, wind and vocal pops.
(Off/10 – 240 Hz)
The limiter can prevent distortion by reducing loud
input signals.
This sets how Ambisonic input sounds are
monitored.
(Stereo/Binaural)
This adjusts the line output level. (−40 dB – 0 dB)
A test tone can be played in order to adjust the level
of a digital SLR camera or other device.
This sets the mic orientation during recording.
(Auto/Upright/Upside Down/Endfire/Endfire Invert)
This sets the file format used to record files.
(FuMa/AmbiX/Ambisonics A/Stereo/Binaural)
The recording format can be selected in consider-
ation of audio quality and file size.
(44.1k/16 bit – 96k/24 bit)
This sets the file name used for recorded files.
(Auto (Date)/User Defined Name)
A tone signal (sound marker) can be output from
the PHONE OUT and LINE OUT jacks when recording
starts.
(Off/On)
11