Table of Contents
Advertisement
(3) Snapshot
1.2.3 Buttons for HDMI
The following buttons are used only for HDMI mode.
： When in HDMI mode, the HDMI cable must connect with the screen
(1) HDMI
and microscope.
(2) Menu on Screen
(2-1) BRIGHTNESS：Adjusts the brightness of the entire image. [1~31]
(2-2) CONTRAST：Emphasizes the difference between bright and dark. [1~31]
(2-3) SATURATION：Adjusts the color level. [1~31]
(2-4) EXPOSURE VALUE：
[ON] Auto mode, use with the exposure value +/-. This mode will
automatically adjust the image brightness. For the best result, turn on
all LED lighting. For more on adjustment, please refer to Section
1.2.3-(7).
[OFF] Manual mode, use with the LED brightness +/- and the exposure
value +/-. This mode allows you to manually adjust the LED brightness
and exposure value. For more on adjustment, please refer to Section
：Takes a 5M picture and delivers it to the application program.
：Open/close menu for setting.
5
Advertisement
Table of Contents
