Removing The Fan Assembly - HP Engage One Retail System 141 Maintenance And Service Manual

Removing the fan assembly

The fan assembly is secured with four screws and has one cable.
To remove the fan:
1. Prepare the computer for disassembly
2. Remove the computer head unit from the stand
the stand on page
3. Remove the display panel from the computer head unit
4. Disconnect the fan cable from the system board (1), and then remove the tape that secures the cable to
the system board (2).
5. Loosen the four captive Phillips screws (3) that secure the fan assembly to the computer head unit.
6. Remove the fan assembly from the computer head unit (4).
To reinstall the fan assembly, reverse the removal procedure.
52 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
27).
(Removing and attaching the Engage One head unit to
(Removing the display panel on page
19).
41)