Table of Contents
Advertisement
Quick Links
The EL-485-A Positioning and Support Kit can be
used for both Urinal and Water Closet Installations.
The EL-518-A Positioning and Support Kit can be
used for Urinal Installations only.
This manual only covers installation of the Optima ES-S Flushometer Electrical Box Positioning and Support Kit.
Use these instructions in conjunction with the separate installation instructions included with each ES-S Flushometer.
The Sloan Optima ES-S Flushometer Electrical Box Positioning and Support Kit
is designed to accurately position and ease installation of the Electrical Box on
exposed closet and urinal models.
The Electrical Box Positioning and Support Kit is furnished complete with a
positioning plate, mounting rails, pipe support and fasteners.
Sloan Valve Company warrants its Optima ES-S Flushometer Electrical Box Positioning and Support Kit to be made of first class materials, free from defects of
material or workmanship under normal use and to perform the service for which it is intended in a thoroughly reliable and efficient manner when properly installed
and serviced, for a period of three years from date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which
prove to be thus defective if returned to Sloan Valve Company, at customer's cost, and this shall be the sole remedy available under this warranty. No claims will
be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company's products
directly from Sloan Valve Company for purpose of resale.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
INSTALLATION INSTRUCTIONS
OPTIMA
ES-S FLUSHOMETER ELECTRICAL BOX
®
POSITIONING AND SUPPORT KIT FOR EXPOSED
CLOSET AND URINAL INSTALLATIONS
The following instructions will serve as a guide when installing the Sloan ES-S
Flushometer Electrical Box Positioning and Support Kit. As always, good safety
practices and care are recommended when installing your new Electrical Box
Positioning and Support Kit. If further assistance is required, contact your nearest
Sloan Representative office or Sloan's Installation Engineering department.
LIMITED WARRANTY
EL-485-A I.I. — Rev. 0 (08/02)
Code No. 0816541
EL-485-A and EL-518-A
Optima ES-S Flushometer
Electrical Box Positioning and
Support Kit
For Installation with Sloan
Exposed Optima ES-S
Flushometer Models
Made in the U.S.A.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sloan EL-485-A
Summary of Contents for Sloan EL-485-A
-
Page 1: Installation Instructions
During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be the sole remedy available under this warranty. - Page 2 PRIOR TO INSTALLATION Once the Positioning and Support Kit is installed, the following must be completed: Prior to installing the Sloan Optima ES-S Flushometer Electrical Box Positioning • Electrical wiring and Support Kit, install the items listed below: • Finish wall •...
- Page 3 Drain. CENTERLINE OF DRAIN After Installation of the Sloan Optima ES-S Flushometer Electrical Box Positioning and Support Kit • Install the plaster ring of the required depth to the electrical box leaving the Separate the two pipe supports using a utility knife or scissors.
-
Page 4: Parts List
Note: If the EL-485-A Positioning and Support Kit is being installed prior to having the ES- S valve on the jobsite, temporarily attach the EL-151 Plate to the Adapter with the EL-152 Socket Head Fasteners.
Need help?
Do you have a question about the EL-485-A and is the answer not in the manual?
Questions and answers