(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com Bluetooth® Interface EN-1 INTRODUCTION This Interface Kit is for use with Ohaus Scout STX, SPX, SKX and SJX series products. INTERFACE INSTALLATION Install the Interface module on the mini DIN port (round connector) located at the rear side of the balance as shown.
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com EN-2 Bluetooth® Interface CONNECTION Once the APP is installed, the Bluetooth APP icon will be shown on your Mobile or Tablet device. Open the APP and it will scan the ambient Bluetooth device automatically.
Page 5
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com Bluetooth® Interface EN-3 APP MAN INTERFACE Note: the display content might be different in different revisions. Item Description Bluetooth Status, click to disconnect the Bluetooth interface Weighing Display Area Keys to operate the Balance ...
Page 6
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com EN-4 Bluetooth® Interface The following Interface Commands will be acknowledged by the Balance. They are case sensitive. Command Function Immediate Print of displayed weight (stable or unstable). Print displayed weight (stable or unstable). Continuous Print.
Page 7
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com Bluetooth® Interface EN-5 COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 8
Should this device be passed on to other parties (for private or professional use), the content of this regulation must also be related. For disposal instructions in Europe, refer to www.OHAUS.com/weee. Thank you for your contribution to environmental protection.