Advertisement
Chapter 3: Hardware Setup
8. From the inner side, insert the side of
the PCIe Expansion card with the
meshed metal slot cover into the chassis,
with the holder stuck out from inside.
Make sure the Grip is stuck out
9. Install the Bracket assembly into the
PCIe connector on the motherboard.
Ensure that the golden connectors of
the Bracket are firmly seated in place.
10. On the rear panel, use a screw to
secure the slot Cover Bracket and the
Grip onto the chassis.
11. To accommodate a FH/FL-sized PCIe
Expansion card, please also fix Bracket B
in the chassis using two screws in order
to support the PCIe Expansion Card.
Slot Cover Bracket
Bracket B
37
8
8
10
Grip
9
Advertisement
