Advertisement
Chapter 3: Hardware Setup
4. Take out the HDD tray.
5. Slide the disks into the tray. Make
sure the disk connector faces the
direction as the picture shows.
6. To mount the disks onto the empty
tray, secure them on the tray with
two disk screws locked on each side
of the disk.
7. Have the cable ends go under and
pass through the CPU dusk cover and
then insert one end of the SATA data
cable into the SATA connector on the
motherboard.
You can temporarily
unscrew the bolts that fix the dusk
cover for easier operation.
5
Disk
Screws
SATA2
SATA1
1
27
4
SATA
Contacts
6
Disk
Screws
Dust Cover
7
Advertisement
