NCA-2510 User Manual
The motherboard supports DDR4 registered DIMM memory for heavy-duty operations. Please follow the
steps below to install the DIMM memory modules.
1. Locate the the DIMM slot.
2. Pull open the DIMM slot latches.
3. Align the notch of the DIMM module
with the socket key in the slot.
4. Push the module on its both corners
into the slot until it is firmly seated.
The latches will automatically snap
locked.
Warning: The Harcuvar system
can take up to 9 minutes from
booting up to EFI shell in its first initial.
In the 2nd boot, 2 minutes is all it takes
for a fast boot, which is considered
normal for a total of 32G DIMM.
However, with higher capacity of DIMM
used, the boot-up time gets longer.
2
3
4
4
34
1
2
Notch
Socket Key