Headphones; Quick-Start Demo - Teknetics G2+ Owner's Manual

QUICK-START DEMONSTRATION
a. Notice that motion is not required.
VIII.Press-and-hold
A motionless object induces a hum.
b. Notice the variable pitch & volume hum.
c. Move the nickel closer to and farther away from the searchcoil.
Notice the changing "depth" values.
The detector is now in the ALL METAL Mode
IX. ClicktheMODE knobtotheright.
a. Keep GAIN set at the 12:00 position
b. Rotate the THRESHOLD knob slowly from the far counterclockwise
position to the full clockwise position.
Notice these attributes of the THRESHOLD control, with no metal
over the searchcoil.
i. at low settings you will hear no sound
ii. at mid-scale, there will be a transition point from no sound to
iii. at full scale you will hear a loud, constant tone. It may also have
USE WITH HEADPHONES
The is equipped with a 1/4" headphone jack. Any headphones with a stereo
G
2+
plug will work; headphones with a mono plug will not work. Using headphones
extends battery life, and also prevents the sounds from bothering bystanders. It
also allows you to hear subtle changes in the sound more clearly, particularly if
searching in a noisy location. If gold prospecting, gold nuggets are often very
small, so closely monitoring changes in sound using headphones will improve your
gold prospecting results. For safety reasons, do not use headphones near traffic
or where other dangers are present. This device is to be used with interconnecting
cables/headphone cables shorter than three meters (ten feet).
and hold the nickel over the searchcoil
a barely audible, choppy sound.
an irregular or choppy sound, as a result of electromagnetic
interference emitted from other electrical devices.
(not included)
9