Teknetics G2+ Owner's Manual page 22

OPERATING IN DISCRIMINATION MODE
When a target is detected, the rectangular segments representing the target
category are illuminated.
Hereisanexampleofonepossiblediscriminationsetting:
Values less
than 21 will
NOT BE
DETECTED
This discrimination interface for the
hunting.
Relic hunters want control over what sizes of iron are detected, and also control
over which targets are detected with a low-tone. Target values of 39 or less are
ferrous.
22
Values from 21 to 50
will induce a LOW tone
settings, watch the screen, and
Suggestion:
pass objects over the searchcoil at
each setting. It will quickly become
obvious how these controls work.
DISC = 20
V-BREAK = 50
NOTCH not set
Values from 51 to 99
will induce V.C.O. tones
was designed especially for relic-
G
2+
Try changing the
This value
and lower
will not be
detected