Table of Contents
Advertisement
OPERATING IN DISCRIMINATION MODE
Use
or
Volume
is highlighted. The default volume setting is 7.
Press
to increase speaker volume. Maximum volume is at setting 20.
Press
to lower speaker volume. The minimum volume setting is 0, no sound.
With volume set to 0, the Target-ID and Depth Bar Graph will function as
normal, but the detector will not emit a sound when targets are detected.
The overload volume signal will always sound off in the event of signal
overload, even with the volume set to 0.
Because the
detector incorporates FeTone™, Adjustable Iron Audio, a feature to reduce
the volume of iron targets to minimize user fatigue.
Volume settings 10 - 20 are available to control the volume level of iron
targets.
As you increase volume from 10 to 20, iron-volume changes from silent
to maximum. Note that, depending on the V-BREAK
may induce V.C.O. tones; in this case, the V.C.O. tones in the iron range
(ID 1 - 39) will also have the same reduced volume.
At each of the 10 - 20 volume settings, nonferrous target response is
maximum volume.
Volume control applies only to motion target detection.
Volume changes do not affect Pinpoint volume.
Tabledescribesferrousandnonferrousvolumeateachsetting
1
Setting
2
3
4
5
6
7
8
9
10
Setting Memory:
When detector is powered OFF settings are saved, except for the ground setting and backlight
level.
When detector powers ON, ground is preset to 82.9 and backlight is always OFF.
How to preset to factory default settings (if desired).
• Power detector OFF.
• Set right knob to DISC.
• Press-and-hold
• Turn ON while holding
• The menu options will flash.
• Release
18
to adjust the volume setting when the VOLUME menu option
is so sensitive to even the smallest iron targets, the
G
2+
Nonferrous
Ferrous
Volume
1
2
3
4
5
6
7
8
9
10
.
.
; detector turns on and all settings are restored to the factory defaults.
Operating in Discrimination Mode continued on next page
1
11
Setting
2
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
0
20
setting, iron targets
®
Nonferrous
Ferrous
Volume
10
1
10
2
10
3
10
4
10
5
10
6
10
7
10
8
10
9
10
10
- Quick Links:
- Batteries
Hide quick links:
Advertisement
Table of Contents
