Table of Contents
Advertisement
Conettix D6680 | Installation Instructions | 3.0 Configuration and Programming
13. Scroll to 6.3.6 Network Automation
Output Format.
14. Type 1 for 6500 mode or 2 for SIA mode and
press [M/E] to enter the selection.
15. Press [CAN] and scroll down to 6.3.7 Device.
16. Press [M/E].
17. Press 1 for automation communication through a
network, or 2 for automation communication
through the RS-232 COM3 port.
18. Press [CAN] and scroll down to 6.4 D6200
Network Connections.
19. Press [M/E] to move to 6.4.1 IP Address 1.
20. Press [M/E] again to enter the IP address of the
host PC that runs the D6200 Software.
When entering an IP address through the
keypad of the D6600, press an alpha
character ([A] to [F]) to enter a decimal
point in the IP address.
For example, enter IP address 202.96.168.127 as:
[2][0][2][A][9][6][A][1][6][8][A][1][2][7][M/E].
14
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
21. Scroll to 6.4.5 Network Programming
Enable. Verify that the value is 1. If the value is
not 1, press [M/E][1][M/E].
22. Set 6.2.6 COM1 Network Encryption
Enabled to 1 if the D6680 connected to COM1
has encryption enabled.
23. Press [CAN] repeatedly to return to the idle stage
(time and date show on the LCD).
3.8
Editing Program Parameters
Account database information must be entered into the
D6600 before it is ready to manage and receive signals
from alarm panels connected to a DX4020,
D9133TTL-E, or C900TTL-E. Bosch recommends using
the D6200 Programming Software to program this
information.
The D6200 is a graphical use interface (GUI) that
allows the user to perform the following functions:
•
Retrieval of data files from the D6600
(CPU/Host/Network, Account Database, or Line
Card)
•
Editing of the D6600 data files
(CPU/Host/Network, Account Database, or Line
Card)
•
Sending the files back to the D6600
(CPU/Host/Network, Account Database, or Line
Card)
•
Upgrading the Software installed in the D6600
(CPU, System, or PSTN line cards).
Refer to the D6200 Software Operation and Installation
Guide (P/N: 4998154991) for information and
procedures on how to accomplish these tasks.
Bosch Security Systems, Inc. | 5/07 | 4998138732-01
Advertisement
Table of Contents
