Subscribe to Our Youtube Channel
Related Manuals for Exsys EX-3505
Summary of Contents for Exsys EX-3505
- Page 1 PCIe SATA II 300 4-Channel Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their Respective owners.
-
Page 2: Bus Interface
Features Marvell 88SX7042 chipset Upwards compatible with PCI-Express 8x, 16x Compliant with PCI Express Base Specification 1.0a Compliant with Serial ATA 1.0 specification with support for full complement of SATA II optional features Supports SATA II Native Command Queuing (NCQ) Provides four independent channels to support up to four Serial ATA drives Supports SATA up to 300MB/Sec... -
Page 3: System Requirements
System Requirements PCI Express-enabled system with one available PCI Express slot Windows® 2000, XP, Server 2003, Vista Package Contents 1 x PCIe SATA II 300 4-Channel Adapter 1 x Driver CD 1 x User’s Manual Optional Accessories SATA Data Cable SATA Power Cable Hardware Description Note: There are six SATA ports in PCIe SATA II 300 4-Channel... - Page 4 G (Jumper Settings) Description Active Port J2-J5 1-2 close Enable SATA Connector D 2-3 close Enable SATA Connector E J6-J9 1-2 close Enable SATA Connector C 2-3 close Enable SATA Connector F MN2000000130 Page 4 ...
-
Page 5: Hardware Installation
Hardware Installation Turn Off the power to your computer and any other connected peripheral devices. Unplug the power cord from the back of the computer. Remove your computer’s cover. Remove the slot bracket from an available PCI Express slot. To install the card, carefully align the card’s bus connector with the selected PCI Express slot on the motherboard. -
Page 6: Driver Installation
Follow the same instructions to connect up to four hard drives. Device connection is now complete. Replace the computer cover and reconnect the power cord. Driver Installation For Windows® 2000 At Found New Hardware Wizard, click Next. Select Search for a suitable driver for my device(recommend) then click Next. -
Page 7: For Windows Vista
this time, then click Next. Insert the driver CD, select Install the software automatically (Recommended), and click Next. If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility. Click Finish. -
Page 8: To Verify Driver Installation
To Verify Driver Installation Right click My Computer and click Manage. Select Device Manager. Look for the following: Windows® 2000/XP/2003: Double click SCSI and RAID Controller: -Marvell Serial ATA Gen 2 PCI Express Adapter should be displayed Windows® Vista: Double click Storage controllers: -Marvell Serial ATA Gen 2 PCI Express Adapter should be displayed...
Need help?
Do you have a question about the EX-3505 and is the answer not in the manual?
Questions and answers